Amiga 600 Power Supply

[Tenacious]

Yeah I forgot to say I had no luck when using the Shield GND, had to put the NEG probe on 0V GND instead.

Retested and got the following results:-

13.80v
-14.25v
5.29v

Unfortunately, I don't have a spare PS to check

Its too late now, but, switching power supplies should always be measured while LOADED.  That is, connected to, and powering the computer they are designed to run.  You may have to read the rails (+5V, +12V, -12V, etc) inside the Amiga, since the connector will be plugged in.  The rails should be within say, 5%, and most importantly, not drift very much.

[paul1981]

Now you see why I hate the "surface mount" Amiga models.  Nothing but problems with the pieces of crap.  This includes the Amiga 1200 and 4000 models.

Maybe, but it kept the cost down, and the A4000 and A1200 had AGA going for it.