Welcome, Guest. Please login or register.

Author Topic: Problems with (ATX) PSUs and Gfx  (Read 1043 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline ciVicTopic starter

  • Jr. Member
  • **
  • Join Date: Nov 2004
  • Posts: 98
    • Show only replies by ciVic
Problems with (ATX) PSUs and Gfx
« on: February 19, 2012, 09:31:10 PM »
Hi all!

I've bought a CSPPC and it's working flawlessly. But I tried the original PSU and 3 different ATX PSU. Either my Piccolo SD64 worked VERY slow in the first minutes (yes, the Amiga has to get warm until the card works), or the AGA graphic does not work well. E.g. the "Insert Disk" screen at startup flickers (random colors) or even crashes.

Since the symptoms depends on the PSU I think they are all not suitable since I own a CSPPC. Can somebody recommend a Micro ATX PSU which I can buy in Europe so that everything works without warming up?
 

Offline Blendor_POLAND

  • Newbie
  • *
  • Join Date: Aug 2011
  • Posts: 48
    • Show only replies by Blendor_POLAND
Re: Problems with (ATX) PSUs and Gfx
« Reply #1 on: February 20, 2012, 09:12:44 PM »
new atx psu is to weak for gfx and scppc
microATX is this same situation
new atx have 5v line to weak !!!!

i recomended old atx ibm or dell ten years old is very strong line 5v
and work good with gfx