Welcome, Guest. Please login or register.
Forums
« previous next »
Pages: [1]   Go Down

Author Topic: Blizzard PPC 060 rev 6 (spares/repairs)  (Read 1608 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline WasagiTopic starter

  • Newbie
  • *
  • Join Date: Sep 2010
  • Posts: 34
    • Show only replies by Wasagi
Blizzard PPC 060 rev 6 (spares/repairs)
« on: January 22, 2011, 04:36:34 PM »
This board will only boot if held in place on the A1200 edge connector.  Have tried a number of remedies and now it just has to go:

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&rd=1&item=320646546454&ssPageName=STRK:MESE:IT
Logged
 

Offline darkage

  • Hero Member
  • *****
  • Join Date: Aug 2007
  • Posts: 583
    • Show only replies by darkage
Re: Blizzard PPC 060 rev 6 (spares/repairs)
« Reply #1 on: January 23, 2011, 11:08:42 PM »
What kind of remedies where connected?   Tried to reflow solder joints on connector?

EDIT:  Opps never mind saw the reasons.

1. Replaced 68k processor with a fully working MC68060RC50 Rev 6 Mask 71E41J which cost £60 for the processor itself
2. Replaced board edge connector to see if it was a mechanical contact issue
3. Desoldered PPC chip assuming this was issue (PPC chip will be included in sale)

Man thats sucks
Logged
 
Pages: [1]   Go Up
« previous next »