Welcome, Guest. Please login or register.
Forums
« previous next »
Pages: [1]   Go Down

Author Topic: One of my Deneb USB ports not working  (Read 2435 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline mousehouseTopic starter

One of my Deneb USB ports not working
« on: October 19, 2010, 10:43:35 AM »
Hi all,

I just got my second Deneb card and installed it into my A4000D. Now, the middle USB port (the one closest to the physical internal USB port) doesn't work. I have already tried to swap the leads with the other port, the lead is fine, just the port won't do anything.

Poseidon, Trident, etc. they all show everything OK.

Any tips and things to check before I start suspecting the hardware is broken? :(
Logged
A3000T
 

Offline stachu100

  • Sr. Member
  • ****
  • Join Date: Aug 2009
  • Posts: 292
    • Show only replies by stachu100
Re: One of my Deneb USB ports not working
« Reply #1 on: October 19, 2010, 10:56:43 AM »
Hardware is broken. :(
I've killed one of USB port on my Deneb by static discharge too...
Logged
 

Offline Piru

  • \' union select name,pwd--
  • Hero Member
  • *****
  • Join Date: Aug 2002
  • Posts: 6946
    • Show only replies by Piru
    • http://www.iki.fi/sintonen/
Re: One of my Deneb USB ports not working
« Reply #2 on: October 19, 2010, 10:59:31 AM »
Quote from: mousehouse;585656
I just got my second Deneb card and installed it into my A4000D.
Wait a second, why did you install a second card? Wouldn't USB HUB do the same job?


*EDIT*
Oh right 2nd Amiga of course. I skipped some words while reading.
« Last Edit: October 19, 2010, 11:06:33 AM by Piru »
Logged
 

Offline VingtTrois

  • Lifetime Member
  • Hero Member
  • *****
  • Join Date: Mar 2009
  • Posts: 897
  • Country: 00
    • Show only replies by VingtTrois
    • http://www.amiga.org/gallery/images/6006/1_2316_My_AMIGA_Collection_Sept2010.jpg
Re: One of my Deneb USB ports not working
« Reply #3 on: October 19, 2010, 11:00:33 AM »
And what about the warranty (2 years)? Is it an used (second hand) DENEB card?
@Piru: I suppose he have one DENEB on each A4000D and not 2 DENEB on one AMIGA :)
Logged
-A3K(T)040@35MHz/78MB/KS3.1/OS3.9/Buster11/PICASSO II/GVP IO/A2088XT/DENEB/HDD18GB
-A3K(D)030@25MHz/134MB RAM/KS3.1/OS3.9/Buster11/RETINA Z2/OKTAGON 2008/VLAB YC/MIDI/DKB3128/HDD18GB
-A2K/ROM 1.3-3.1/2MBCHIP/8MB/A2091/OKTAGON 2008/A2058/TANDEM IDE/FlickerFixer-Scandoubler/Genlock
-A1200/KS3.1/2MB+9MB/CF2GB A1200[/
 

Offline mousehouseTopic starter

Re: One of my Deneb USB ports not working
« Reply #4 on: October 19, 2010, 11:02:29 AM »
I got a second Deneb for my second Amiga ;-)

Just to make sure the second Amiga is not b0rked I unplugged the Deneb from my 'working' Amiga and put the new Deneb in. Flashed the Poseidon config / setup and it should be an identical setup.

Thanks for the tips, I'll get in touch with the store to see if they can do anything for me...
Logged
A3000T
 

Offline Trev

  • Hero Member
  • *****
  • Join Date: May 2003
  • Posts: 1550
  • Country: 00
    • Show only replies by Trev
Re: One of my Deneb USB ports not working
« Reply #5 on: October 19, 2010, 03:02:42 PM »
It's such a common problem; Michael should have used a single, keyed header for both ports. Keyless Zorro slots don't help either....

Does the warranty cover it? I think there's at least two warnings in the manual.
Logged
 

Offline mousehouseTopic starter

Re: One of my Deneb USB ports not working
« Reply #6 on: October 19, 2010, 05:56:32 PM »
Quote from: Trev;585678
It's such a common problem; Michael should have used a single, keyed header for both ports. Keyless Zorro slots don't help either....

Does the warranty cover it? I think there's at least two warnings in the manual.


Don't know if the warranty covers it, I assume not. I'm quite certain that I took every reasonable precaution on the installation but I will never know if it came with a defective port or if it was because of my doing.

Even though I should be happy the other port works it still sucks.
Logged
A3000T
 

Offline Heiroglyph

  • Hero Member
  • *****
  • Join Date: Jun 2010
  • Posts: 1100
    • Show only replies by Heiroglyph
Re: One of my Deneb USB ports not working
« Reply #7 on: October 19, 2010, 07:23:22 PM »
I've got the identical problem.

I know that I reversed one plug, but I'm not 100% certain that I used that plug before discovering it, I just assume it was my fault.

Regardless, I'm in the same boat and using a USB hub now.
Logged
 
Pages: [1]   Go Up
« previous next »