Welcome, Guest. Please login or register.
Forums
« previous next »
Pages: [1]   Go Down

Author Topic: AOS 3.9 HDTB  (Read 1217 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline kingkleksTopic starter

  • Newbie
  • *
  • Join Date: Oct 2003
  • Posts: 44
    • Show only replies by kingkleks
AOS 3.9 HDTB
« on: November 14, 2003, 12:44:15 AM »
Hi!
I am trying to install a 4 GB SCSI Seagate Barracuda on scsi.device but there are some problems. Namely if I use FFS all seems ok but I want PFS3 and that is where I have problems. I consistently get an "Error 2 (or4) in drive description" message when trying to save the changes to the drive. Then after reboot there are three equally sized FFS (!) partitions on the drive. Now I was able to partition (with PFS3 and all) the drive with HDTB from AOS 3.1 (no problems whatsoever with that) but why should I have to use that if there is a newer easier to use and supposedly better HDTB? Did anybody have similar problems?
Logged
Windows does not cut the mustard.  But it does cut the cheese.
 

Offline Castellen

Re: AOS 3.9 HDTB
« Reply #1 on: November 14, 2003, 01:55:48 AM »
OS3.9 HD ToolBox works fine to install PFS3.  I've done it many times before.

Send me your email address and I'll forward on some step by step instructions on how to do it that I wrote ages ago.


Anthony.
Logged
 

Offline kingkleksTopic starter

  • Newbie
  • *
  • Join Date: Oct 2003
  • Posts: 44
    • Show only replies by kingkleks
Re: AOS 3.9 HDTB
« Reply #2 on: November 16, 2003, 08:45:08 PM »
Can anybody tell me what those errors are?
Logged
Windows does not cut the mustard.  But it does cut the cheese.
 
Pages: [1]   Go Up
« previous next »