Welcome, Guest. Please login or register.
Forums
« previous next »
Pages: [1]   Go Down

Author Topic: Issue with GVP 040  (Read 1078 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline desantiiTopic starter

  • Amiga Addict!
  • Sr. Member
  • ****
  • Join Date: Sep 2009
  • Posts: 385
    • Show only replies by desantii
Issue with GVP 040
« on: February 10, 2010, 08:43:47 PM »
I have a GVO 040 33mhz accelerator for the 2000 but can not get it to boot. All I get is a black screen, sometimes cycles into a second dark grey screen and stays there.
I have played around with the jumpers but no luck.
 
any thoughts?
Logged
Amiga 1200/030 50mhz, 64mb ram

Amiga 2000, 030 25mhz, 7mb ram, A2320,  SCSI2CD
 
Amiga 3000/030 25mhz, CF SCSI card

Amiga 4000/ 040 33mhz 274mb ram
 

Offline gertsy

  • Lifetime Member
  • Hero Member
  • *****
  • Join Date: May 2006
  • Posts: 2318
  • Country: au
  • Thanked: 1 times
    • Show only replies by gertsy
    • http://www.members.optusnet.com.au/~gbakker64/
Re: Issue with GVP 040
« Reply #1 on: February 11, 2010, 02:43:02 AM »
I'd set all the jumpers back to what they should be.

Have you had the card working before ?

Your 2000 still boots without the card ?

If so remove any drives and memory from the card and see if the 2000 boots from floppy.
If it does fire up the GVP Install floppy and run the card test utility. Can't remember what it's called.

Goodluck

Gertsy
« Last Edit: February 11, 2010, 02:45:10 AM by gertsy »
Logged
 
Pages: [1]   Go Up
« previous next »