Indivision ECS and my GVP SCSI board don't get along!

[mdivancic]

I think you've got the right idea here - I've only got one (small?) problem:

To date, I've been unable to get my Zeus board to recognize any SCSI devices connected to it, via either the internal or external connectors.  I've got the SCSI patch in my WBStartup folder (from the Zeus install disk), but no dice, even when running the HDToolbox.

I'm hoping it's just a jumper issue, but without the manual I'm in the dark.  Does anyone even know if there are any jumpers on the Zeus that relate to SCSI?

Huxley

Have you tried the software on the PPG install disk?

[soulboy]

Hmm interesting I have a similar problem with a GVP SCSI card I bought. I don't have the Indy ECS yet for my 2000 but if I have the boot jumper on then I get the black screen and the power light flashes. If I take off the the boot jumper then the 2000 boots up ok. I havent solved the problem but the seller is sending me a new rom for the scsi card. If it works I will let you know.

[QuikSanz]

@Huxley_D,

I think mdivancic is on the right track. As I recall GVP uses "gvpscsi.device", I'll bet the Zeus does not. Check this out and see if you can get the Zeus SCSI working.

Chris

[zipper]

Something odd, like PPSSscsi2.device perhaps?