Welcome, Guest. Please login or register.

Author Topic: A4000 and IDE CD-ROM drive  (Read 1945 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline mikey2001Topic starter

  • Sr. Member
  • ****
  • Join Date: Oct 2003
  • Posts: 377
    • Show only replies by mikey2001
A4000 and IDE CD-ROM drive
« on: October 29, 2003, 04:57:36 PM »
Hello, I am fairly new to the Amiga scene, so please be gentle!  :-)

I have just aquired an A4000/040 desktop with a 2GB hard drive running off the IDE port. I have tried to add a 54x speed CD-ROM drive to the system, but I cannot get the Amiga to recognise the CD drive. I have placed CD0 in the Devs folder so that it automounts, but still nothing seems to be happening? Can anyone help me please?  :-?  :huh:
Mike
 

Offline ShadesOfGrey

  • Sr. Member
  • ****
  • Join Date: Mar 2002
  • Posts: 303
    • Show only replies by ShadesOfGrey
Re: A4000 and IDE CD-ROM drive
« Reply #1 on: October 29, 2003, 06:17:31 PM »
What version of Amiga OS are you running?
Unless otherwise explicitly stated, this message is not meant to affirm nor deny, defend nor offend any faction within the \\\'Amiga\\\' Community.
 

Offline mikey2001Topic starter

  • Sr. Member
  • ****
  • Join Date: Oct 2003
  • Posts: 377
    • Show only replies by mikey2001
Re: A4000 and IDE CD-ROM drive
« Reply #2 on: October 29, 2003, 06:52:09 PM »
Version 3.1
Mike
 

Offline JurassicCamper

  • Hero Member
  • *****
  • Join Date: May 2002
  • Posts: 635
    • Show only replies by JurassicCamper
Re: A4000 and IDE CD-ROM drive
« Reply #3 on: October 29, 2003, 07:10:50 PM »
Quote

mikey2001 wrote:
Version 3.1

you need either

os3.5 + / idefix or asimcdfs

I've been trying to get mine to work for months but no joy with 3.9
A1200T PPC 330Mhz in a Custom Modified Fractal Design R3 Case
 

Offline mikey2001Topic starter

  • Sr. Member
  • ****
  • Join Date: Oct 2003
  • Posts: 377
    • Show only replies by mikey2001
Re: A4000 and IDE CD-ROM drive
« Reply #4 on: October 30, 2003, 12:31:11 AM »
Is there any step-by-step guide for IDE CD drive installation anywhere on the Net?  :-? :huh:
Mike
 

Offline Matt_H

Re: A4000 and IDE CD-ROM drive
« Reply #5 on: October 30, 2003, 01:43:49 AM »
Hmmm... It should be working with a basic 3.1 install. The built in CD drivers are crap, but they do work. Make sure CDFileSystem is in L: and check the CD0 tooltypes to make sure they're set correctly. If there's nothing there, edit the CD0 file itself to change the device and unit numbers. You'll want scsi.device unit 1. Also, are your master/slave jumpers on the drives themselves set properly?

You should try to replace the CDFS with something else ASAP, though. Try AmiCDFS on Aminet.
 

Offline Thomas

Re: A4000 and IDE CD-ROM drive
« Reply #6 on: October 30, 2003, 10:24:58 AM »
Quote

Matt_H wrote:
Hmmm... It should be working with a basic 3.1 install.


No, it does not work. The built-in IDE driver does not recognise CD-ROM drives.

You need IDEfix to begin. IDEfix has an installerscript that does all for you (provided that you have the hardware installed all correctly).

Without a running CD-ROm drive you cannot install OS3.9, so you need at least the demo version of IDEfix on the first run.

Bye,
Thomas

Offline Brian

  • Hero Member
  • *****
  • Join Date: Mar 2003
  • Posts: 1604
    • Show only replies by Brian
    • http://www.syntaxsociety.se
Re: A4000 and IDE CD-ROM drive
« Reply #7 on: October 30, 2003, 12:42:21 PM »
Ehm, scsi.device in 3.0/3.1 doesn't support atapi devices as far as I know, asimcdfs or idefix is the solution if you ain't aiming for a newer OS that is. :-)

Offline mikey2001Topic starter

  • Sr. Member
  • ****
  • Join Date: Oct 2003
  • Posts: 377
    • Show only replies by mikey2001
Re: A4000 and IDE CD-ROM drive
« Reply #8 on: October 30, 2003, 04:37:26 PM »
Downloaded IDEFix97 and my CD drive is now up and running. Many thanks to everyone who helped.  :-)  :-)  :-)
Mike