Welcome, Guest. Please login or register.
Forums
« previous next »
Pages: [1]   Go Down

Author Topic: GVP HD8+ SCSI controller  (Read 1120 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline Ross1Topic starter

  • Full Member
  • ***
  • Join Date: Feb 2007
  • Posts: 136
    • Show only replies by Ross1
GVP HD8+ SCSI controller
« on: March 17, 2009, 09:35:57 PM »
Picked up one of these GVP HD8+ SCSI controllers. My question is I had a cyberstorm MK3 060 but sold it however I still have the SCSI drive I used with it. Can I use that drive on the GVP HD8+ and boot from it just as I did before without having to reinstall and format everything on the drive?
Logged
 

Offline Iggy_Drougge

  • Sr. Member
  • ****
  • Join Date: Jul 2003
  • Posts: 333
    • Show only replies by Iggy_Drougge
    • http://www.kristallpojken.org
Re: GVP HD8+ SCSI controller
« Reply #1 on: March 17, 2009, 09:41:10 PM »
You may need to reinstall libraries and programs which you installed 68060-optimised versions of.
Logged
A4000/25MHz/64MB/20GB/RetinaBLTZ3/FastlaneZ3/CatweaselMKIII/Ariadne/A2301
A3000/40MHz/32MB/6GB/Merlin/Buddha/X-Surf/FrameMachineII+Prism24
Draco60/50MHz/128MB/15GB/Altais/DracoMotion/DV/IOblix+net
 

Offline Ross1Topic starter

  • Full Member
  • ***
  • Join Date: Feb 2007
  • Posts: 136
    • Show only replies by Ross1
Re: GVP HD8+ SCSI controller
« Reply #2 on: March 17, 2009, 09:52:44 PM »
Ok thanks, have you used one of the GVP HD8+ controllers? is it faster than the on board IDE?
Logged
 

Offline Ross1Topic starter

  • Full Member
  • ***
  • Join Date: Feb 2007
  • Posts: 136
    • Show only replies by Ross1
Re: GVP HD8+ SCSI controller
« Reply #3 on: March 18, 2009, 09:36:29 PM »
Any body know if it is faster than the onboard IDE of the A4000?

Thanks
Logged
 
Pages: [1]   Go Up
« previous next »