Hi there !
I bought a Catweasel MK-3 used so I can connect it both to my Amigas and my PC (due to the flipper-design, which the newer models don't have).
Now, I got it without any documentation. Is there anybody, who could explain me what function all the jumpers and the onboard connectors albeit the obvious ones like the connector for the floppy-drive
?.
I know there are jumpers to set the proper voltage for the older or newer SID-versions and for the filters, but they are not marked on the board, so I cannot tell which jumpers set what. Also, there are several connectors on left side (below the SID) which I cannot identify.
Thanks,
Adrian
