Welcome, Guest. Please login or register.

Author Topic: Connexion network board yields yellow screen  (Read 1237 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline Iggy_DrouggeTopic starter

  • Sr. Member
  • ****
  • Join Date: Jul 2003
  • Posts: 333
    • Show only replies by Iggy_Drougge
    • http://www.kristallpojken.org
Connexion network board yields yellow screen
« on: April 13, 2008, 01:11:20 AM »
My Connexion ethernet card (A2065 clone) prevents any Amiga from booting. The system shows a yellow screen, then proceeds to black and refuses to boot. It's a very rare card, so I don't expect any simple solution, but a pointer to what could be wrong would be very appreciated.
A4000/25MHz/64MB/20GB/RetinaBLTZ3/FastlaneZ3/CatweaselMKIII/Ariadne/A2301
A3000/40MHz/32MB/6GB/Merlin/Buddha/X-Surf/FrameMachineII+Prism24
Draco60/50MHz/128MB/15GB/Altais/DracoMotion/DV/IOblix+net
 

Offline rkauer

  • Hero Member
  • *****
  • Join Date: May 2006
  • Posts: 3263
    • Show only replies by rkauer
Re: Connexion network board yields yellow screen
« Reply #1 on: April 13, 2008, 02:32:55 AM »
 The card uses standard components? If so, try swapping the ethernet interface chip and the rectifiers (diode or diode bridge), too.
Goodbye people.

I\'ll pop on from time to time, RL is acting up.