Welcome, Guest. Please login or register.
Forums
« previous next »
Pages: [1]   Go Down

Author Topic: CyberStorm MK1 maprom jumper?  (Read 1902 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline Craven1200Topic starter

  • Full Member
  • ***
  • Join Date: Oct 2006
  • Posts: 120
    • Show only replies by Craven1200
    • http://www.the-legacy.net
CyberStorm MK1 maprom jumper?
« on: November 26, 2007, 07:28:19 PM »
Hi,

i wanted to use Blizkick with my CyberStorm  mk1..
however blizkick reports that it needs a card with maprom...

since i have no manual..

how can i activate that ?
Logged
- A4000/CSMK1/128mb/Kickflash/CV64/20GB ide hd/ide cdrom/Hydra v1.1 nic
- A2000/Piccolo SD64/A2088XT/VLAB V1.3
- Wookiechat supporter!
 

Offline amiga92570

  • Hero Member
  • *****
  • Join Date: Aug 2006
  • Posts: 1005
    • Show only replies by amiga92570
Re: CyberStorm MK1 maprom jumper?
« Reply #1 on: November 26, 2007, 07:39:15 PM »
Logged
Amiga92570
==========================
(1) 4000T/040 (2)3000t CS 060/233ppc Picasso IV video, (2)D-box 1200 blizzard 060/200ppc Mediator fastATA, (1)amiga 1200 Power tower, (1)amiga 1200 EZ tower with mediator,1200/030/50mhz, (3) amiga 500 with CSA Mega Midget Racer and Trump card AT, (2) amiga 600 one with M-tec 030, (3) CD32 one sx32, two sx32-pro, More accessories and parts than I want to admit to
 

Offline HammerD

Re: CyberStorm MK1 maprom jumper?
« Reply #2 on: November 27, 2007, 07:18:58 AM »
Try:

c:blizkick devs:kick39.rom CPUCARD QUIET

where kick39.rom is your rom file

I had to do that with my A3640 card and also make sure the maprom jumper on the card itself was set to enable.

I added this line right before Setpatch

So:

c:blizkick devs:kick39.rom CPUCARD QUIET
SetPatch NOROMUPDATE QUIET

Works for me :)  Now I have the latest modules installed!

next for me is to find out how to burn some eproms :)
Logged
AmigaOS 4.x Beta Tester - Classic Amiga enthusiast - http://www.hd-zone.com is my Amiga Blog, check it out!
 

Offline Craven1200Topic starter

  • Full Member
  • ***
  • Join Date: Oct 2006
  • Posts: 120
    • Show only replies by Craven1200
    • http://www.the-legacy.net
Re: CyberStorm MK1 maprom jumper?
« Reply #3 on: November 27, 2007, 12:20:05 PM »
well i had no ram on the mainboard  (only chipmem)

when i added some ram blizkick started to work  :-o

thanks for the advice.
Logged
- A4000/CSMK1/128mb/Kickflash/CV64/20GB ide hd/ide cdrom/Hydra v1.1 nic
- A2000/Piccolo SD64/A2088XT/VLAB V1.3
- Wookiechat supporter!
 
Pages: [1]   Go Up
« previous next »