Welcome, Guest. Please login or register.
Forums
« previous next »
Pages: [1]   Go Down

Author Topic: Internal Floppy drive power connectors voltage?  (Read 3458 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline JoseTopic starter

  • Hero Member
  • *****
  • Join Date: Feb 2002
  • Posts: 2871
    • Show only replies by Jose
Internal Floppy drive power connectors voltage?
« on: July 03, 2003, 10:22:49 PM »
Do you know how much is it? I don't have equipment to measure it.
Thanks
Logged
\\"We made Amiga, they {bleep}ed it up\\"
 

Offline Brian

  • Hero Member
  • *****
  • Join Date: Mar 2003
  • Posts: 1604
    • Show only replies by Brian
    • http://www.syntaxsociety.se
Re: Internal Floppy drive power connectors voltage?
« Reply #1 on: July 03, 2003, 10:37:06 PM »
+12V (yellow), GND (black), GND (black), +5V (red) like any other diskdrive. :-D

(Colors might be different... If I'm correct the original A1200 floppy cable was red/black/black/brown in wich case the red in this case is 12V and the brown in 5V... I think ;-))
Logged
 

Offline dslcc

  • Full Member
  • ***
  • Join Date: May 2003
  • Posts: 114
  • Country: us
  • Gender: Male
    • Show only replies by dslcc
Re: Internal Floppy drive power connectors voltage?
« Reply #2 on: July 03, 2003, 10:37:36 PM »
The yellow wire is +12 volts, the red (orange on some A2000's) is +5
volt, the blacks (blue on some A2000's) are ground. :-)

Logged
:-o...
 

Offline JoseTopic starter

  • Hero Member
  • *****
  • Join Date: Feb 2002
  • Posts: 2871
    • Show only replies by Jose
Re: Internal Floppy drive power connectors voltage?
« Reply #3 on: July 03, 2003, 10:43:22 PM »
COol ! Thanks
Me was thinking that the reason my cooler is not workign was because of low voltage. Gonna give a try at the yellow wire ...
Logged
\\"We made Amiga, they {bleep}ed it up\\"
 
Pages: [1]   Go Up
« previous next »