AMIGA 1200 SQUIRREL CDROM CD32 NOT WORKING?

[Angus]

amigaguy00 wrote:
any ideas on the commands in the script?,i booted with no startup-sequence managed to mount the cd drive with mount cd0: command,so i need to add these commands to a boot disc before it loads anything else .

If you want to pm me your home e-mail I'll lha the script with the icon and e-mail it to you. Its at home so it'll be tonight if you want it.

[Doobrey]

amigaguy00 wrote:
My problem is that when i use the cd32 emulator disk created by either idefix or power cd rom software i get cd0:is not mounted,cannot open "atapi.device"unit 3

You've got the wrong device name set in the CD0 mountlist.
It should be 'squirrelscsi.device'.

Since Workbench can see it, just copy the mountlist to DEVS:DOSDrivers/ on the CD32 boot floppy,and check that squirrelscsi.device is in DEVS: on the floppy too.

[amigaguy00]

Hi thanks for your help but how do i change the device name just rename cd0 to squirrelscsi.device? and were would i find the mount list sorry i haven't used an Amiga for 15 years.

[amigaguy00]

ok i reinstalled the scsi squirrel software,and i now have squirrelscsi.device in dosdrivers have also copied to boot disk but still can't boot from cd not mounted :pissed:

[twizzle]

click on the CDO icon in dev/drivers drawer
from the pulldown menu click information
this will open up the cdo icon
in the tool type where  it says DEVICE=squirrelscsi.device
         UNIT=0   change this   UNIT=2 OR 3
SAVE and exit
click again on the CD0 from the pulldown menu
click rename change this to CD2 OR CD3
this corrosponds to your scsi device unit No 2 or 3

then double click your new CD2 OR CD3 icon to mount it
reboot with your scsi cd switched ON