AsimCDFS_Buffer assign oddity {solved}

[T3000]

Hmmm. I have installed AsimCDFS 3.9 on my A4000D os3.5 VT/Flyer 4.2. The CDRom is on the IDE chain. The AsimCDFS_Buffer is on the main IDE HD in DH1. A requester pops up asking to insert "AsimCDFS_Buffer in any drive." during the start of the system bootup halting the loading of WB.
The assign in user-startup was written by the install script. The buffer dir is indeed in DH1. I tried commenting out the assign in user-startup, but the requester still pops up upon boot. I even deleted the assign in user-startup and the buffer directory all together. Still...  

I had installed AsimCDFS on the system before installing the Flyer 4.2 software with no problems. Was tring to get the CDrom on the Flyer Drive chain to function, so I reinstalled AsimCDFS after the Flyer install. This is when the requester thing started happening.

anyone have any idea as to what's happening and how to fix? short of reinstalling everything.

[Thomas]

The Mount command which mounts everything from devs:dosdrivers is run before the execution of user-startup. So if your CD0 needs that assign ,you should either move CD0 from Devs:Dosdrivers into WBStartup or you could move the Assign command from user-startup into startup-sequence just before the Mount command.

Bye,
Thomas

[T3000]

Thomas wrote: move the Assign command from user-startup into startup-sequence just before the Mount command.

Thanks Thomas. Firgured you'd be the one to know the solution. :bow:
Problem now fixed. On to getting the Flyer Drive box CD rom working.  

[pVC]

Little cleaner solution might be to move CD0 from devs:dosdrivers to sys:storage/dosdrivers and insert "mount cd0:" in user-startup after the assign.