Cyberstorm Mk III 68060/50 disks

[flaviosr]

Ciao to everybody,

I have just bought Cyberstorm Mk III for my Amiga 3000.
My problem is that I miss the disks and in the manual it's written that the 68060 driver must be installed BEFORE installing the card (!)... :-?
Now... is there anybody con help with these two disks (I think one for the SCSI controller and one for the CPU)?

Ciao and thank you

[X-ray]

http://phase5.a1k.org/index.php?id=2

[MrZammler]

Not entirelly true (that you need to install from the disk before plugging the card), but it would help.

Basically you need the 68040.library (dummy one) and the 68060.library. Check: http://amiga.resource.cx/exp/cyberstorm2#s_cyberstorm2

[Framiga]

about the CPU libs, download and copy in SYS:Libs/ this full set of libs. This set will works on every AmigaOS/CPU from here to the eternity :-)

If you'll get troubles with the 68060.library 46.15 (don't think so) replace it with the one bundled in  this archive (46.7)

[flaviosr]

Thank you to all!!!  :-)
Now everything works... another problem now! :-o
I have only OS3.1 and I am trying sysinfo that tells me I have a 68040! I look at the true CPU and it is a 68060 (and anyway the Cyberstorm Mk III does not exists with other CPUs than the 68060...).
I think (hope?) this is only a program problem... can you indicate me a program that correctly sees the CPU?

Ciao and thank you again...

[Piru]

Try SysSpeed 2.6. SysInfo is ancient and doesn't know about 68060.