Does anyone know why my PPC is reporting 0 Mhz when I use either scout, whichamiga, or listexp? If I use showinfo it reports correctly (233 Mhz). BTW, the WOS demo runs fine and PPC applications are working. Just can't figure out why some tools keep showing the wrong speed for the PPC? Any ideas?
This is "showinfo" output:
5.WB:PPCTools> showinfo
CPU: PPC 604E (PVR = 00090204)
CPU clock: 233.333333 MHz
Bus clock: 66.666666 MHz
Instruction Cache: ON and UNLOCKED
Data Cache: ON and UNLOCKED
Page table location: 08800000
Page table size: 2048 KBytes
Time base content: 00000006 629B40BE
CPU load: 45.63%
System load: 91.18%
AND THIS IS "listexp"
-- ListExp V37.1 -- Thore Böckelmann
(ListExp is a part of the Identify package, see AmiNet util/libs)
** HARDWARE **
System: Amiga 4000
CPU: 68060/66MHz (Rev 6), FPU=68060/66MHz, MMU=68060
PowerPC: 604e/0MHz (running WarpOS)
Chipset: AGA (RAMSEY F, GARY normal, CHUNKY n/a) VBR=0x082C3570
Agnus: Alice 8374 Rev. 3-4 (Mode: NTSC)
Denise: Lisa 8364 (Rev: 0)
AmigaOS: 3.9 (V45.57, BoingBag n/a, SetPatch V44.38)
Exec V45.20 Workbench V45.3
Support: GraphicOS: Picasso96, AudioOS: AHI, TCP/IP: Miami
Clock: Power 60Hz, VBlank 60Hz, EClock 715909Hz
RAM: Motherboard 32 bit, 80ns, double CAS, 4x bandwidth
Memory: CHIP FAST TOTAL ROM = 512.0KB SLOW = 0
PLAIN ~2.0MB 131.0MB ~133.0MB
VIRTUAL 0 0 0
TOTAL ~2.0MB 131.0MB ~133.0MB
** EXPANSIONS **
Nr ID Address Size Manufacturer Product
----------------------------------------------------------------------------
1 089E.A1 40000000 256M Elbox #161 #0
2 089E.21 50000000 16M Elbox Mediator PCI 4000 Zorro III bridge expansion
3 084F.02 00E90000 64K Sunrize Industries AD516 audio
4 089E.1D 51000000 16M Elbox FastATA 4000 MKII IDE controller
5 2140.64 00F01060 128K Phase 5 CyberStorm PPC accelerator SCSI host adapter
