Welcome, Guest. Please login or register.

Author Topic: a1200 hd question  (Read 1594 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline theformulaTopic starter

a1200 hd question
« on: March 14, 2007, 04:16:15 PM »
Hi i have two a1200's. whats happened is i have moved my old hd from my old a1200 and put it in  my new one. They are both the same type of amiga set up and hd  the main problem is my old harddisk wont boot on new amiga thus forcing me to boot from floppy. would it be summit to do with the start up sequence or summit else? help would be great. I am a bit of a noobie so any suggest will help.
A1200T Blizzard 1240/040/128MB Mediator Voodoo 3
A4000 Cyberstorm MkIII Picasso IV
A1200 020 Viper 8mb
Macmini G4 Morphos 3.1
2x A4000/030 Stock
 

Offline odin

  • Colonization had Galleons
  • Hero Member
  • *****
  • Join Date: Feb 2002
  • Posts: 6796
    • Show only replies by odin
Re: a1200 hd question
« Reply #1 on: March 14, 2007, 05:07:06 PM »
Do they both have the same kickstart?

Offline amazing

  • Sr. Member
  • ****
  • Join Date: Oct 2006
  • Posts: 323
    • Show only replies by amazing
Re: a1200 hd question
« Reply #2 on: March 14, 2007, 05:17:25 PM »
i dont think the kickstart is the problem
i move my h/d sometimes from 1 to the other a1200
1 has the 3.0 kick and the other has 3.1
a1200 blizzard 68030@50mhz/128mb/slimlinecdrom/os3.9
1x MINIMIG...Arm+mem upgrade---build 3
2x a500 1mb internal+2mb in a supraram kick 1.3
c64_1541 with z80 processor
c64 c aldi model+1541 II
3x vic-20_vic1541
1541 III by j.derogee
 

Offline theformulaTopic starter

Re: a1200 hd question
« Reply #3 on: March 14, 2007, 05:18:26 PM »
it booted off it a second ago and now it refuses to :S it must be a connection somewhere
A1200T Blizzard 1240/040/128MB Mediator Voodoo 3
A4000 Cyberstorm MkIII Picasso IV
A1200 020 Viper 8mb
Macmini G4 Morphos 3.1
2x A4000/030 Stock
 

Offline a1200

Re: a1200 hd question
« Reply #4 on: March 14, 2007, 06:31:33 PM »
It could be the ROM waiting for the HDD to spin up. Some don't wait as long. When the computer powered up and you are looking at the purple "insert disk" screen, press ctrl+amiga+amiga (soft reset) and the machine should boot.

Also, some drives power down as you hold reset. To stop this, cut the 1st (usually red) cable. It is not needed on Amigas and will stop the drive motor powering down. There is no advantage or disadvantage to keeping the cable in tact if the motor does not power down, so try my first point before getting your cutters out.
Amiga A1200, 3.1 ROMs, Blizzard 1230 MKIV 128MB & FPU, 4GB DoM SSD, Workbench 3.1
 

Offline theformulaTopic starter

Re: a1200 hd question
« Reply #5 on: March 21, 2007, 03:13:17 PM »
ok its was working fine. I then added my eyetech universal 4-device buffered interface and the HDD worked well. I then added cdrom to ide and it went back to purple insert disk screen on start up. I have tried removing ide interface and just booting off hd and that dont work now GRR! I have tryed removing then plugging everything back togehter and it still go purple screen.
A1200T Blizzard 1240/040/128MB Mediator Voodoo 3
A4000 Cyberstorm MkIII Picasso IV
A1200 020 Viper 8mb
Macmini G4 Morphos 3.1
2x A4000/030 Stock
 

Offline Rabbi

  • Sr. Member
  • ****
  • Join Date: Aug 2006
  • Posts: 269
    • Show only replies by Rabbi
Re: a1200 hd question
« Reply #6 on: March 21, 2007, 03:24:40 PM »
I might think that the CD device takes up a bit of time to spin up to speed vs. a HD.  It sounds to me like the CD isn't ready (up to speed) in the boot-up sequence and causing you problems.
--------------------------------------------------------
In a world without walls and fences, who needs Windows and Gates?
===================================================================
Computer used:     Amiga A1200 (NTSC version) with 128 MB ...
 

Offline theformulaTopic starter

Re: a1200 hd question
« Reply #7 on: March 21, 2007, 03:27:16 PM »
Thanks i will check out cd :)

I think i have sorted it. Looks like it my ide interface is broken, its really old so i will get a  new one :) i now have it running off hd straight and it seems ok
A1200T Blizzard 1240/040/128MB Mediator Voodoo 3
A4000 Cyberstorm MkIII Picasso IV
A1200 020 Viper 8mb
Macmini G4 Morphos 3.1
2x A4000/030 Stock
 

Offline Daniele

  • Sr. Member
  • ****
  • Join Date: Feb 2006
  • Posts: 496
    • Show only replies by Daniele
Re: a1200 hd question
« Reply #8 on: March 21, 2007, 06:56:28 PM »
sometimes it happens to me too but I got idefix and some times a have to wait to boot sometime it comes out the KS!
But is not a big problem ,I can handle this!
Amiga 1200 into a DBox Tower with PPC603e@166Mhz040 256MB Mediator PCI SX - Ide-Fix Express OS4 Classic Voodoo3 Fast Ethernet - A1200 030@40MHZ - A2000 030@25MHZ - A500 - A500+ - A600 - C64 + MMC REPLAY!!!