Hi,
I try to install one fresh WB partition in my A2000 with picasso 96 V2.1b graphics SW, but not success, :madashell:
the machine crash on boot witch a black screen when the CV3d is initialized.
I copy all in other partition an switch the graphics SW for CGX V4, and working OK all of the time.
:-?
I can see when the CV64 3D is initialized, the first time for the CGX then switch to boot on the P96 side and working well.:crazy:
Only not boot at the first time, on cold reset an is impossible until the CV643d is initialized
using the CGX sw.
Any ideas?, Is a SW or HW problem??.
At the begining i think is a SW problem but, after i made
the CGX initialice trick and i see this working, its strage and confuse.:pissed:
I reinstall several times the P96 and change tooltypes, and vars, but even with the same result.
After the card is iniatilized by CGX SW all time i can boot with P96 with no problem and working OK until the machine is power OFF.
Hardware description:
A2000 Blizzard 060/50 128 Mb.
CV64 3D (in the first Zorro slot)
AriadneII (2nd Zorro Slot)
Repulse Sound card (3rd slot )
2MB chip Via DCE MiniMegi CHIP.
THX for any help.
Ciaao. Jose
