Welcome, Guest. Please login or register.

Author Topic: 1200 Accel.  (Read 1260 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline motruckerTopic starter

1200 Accel.
« on: November 24, 2006, 10:52:49 PM »
I found an old Pyramid 1200 FPU/RAM card. Does anyone here know the jumper setting for this thing? One set of jumper is easy to figure out (speed settings), but the others are not.
Any help would sure be appreciated.
A2000 GVP 40MHz \'030, 21Mb RAM SD/FF, 2 floppies, internal CD-ROM drive, micromys v3 w/laser mouse
A1000 Microbotics Starboard II w/2Mb 1080, & external floppy (AIRdrive)
C-128 w/1571, 1750, & Final Cartridge III+
 

Offline rkauer

  • Hero Member
  • *****
  • Join Date: May 2006
  • Posts: 3263
    • Show only replies by rkauer
Re: 1200 Accel.
« Reply #1 on: November 25, 2006, 02:10:45 AM »
Hello!

You could try "The Big Book of Amiga Hardware" http://www.amiga-hardware.com . The page show pics of any Amiga hardware, plus some drives to download and PIN GRIDS!
Goodbye people.

I\'ll pop on from time to time, RL is acting up.
 

Offline motruckerTopic starter

Re: 1200 Accel.
« Reply #2 on: November 25, 2006, 07:22:25 PM »
I already checked with every data base I know of, including The Big Book ------ , with no answers (at least they do list it! as the TRA 1200). This was a last resort.
The card came with an old A1200 I got, with the hard drive ripped out, and NO software whatsoever. It's no great loss.
A2000 GVP 40MHz \'030, 21Mb RAM SD/FF, 2 floppies, internal CD-ROM drive, micromys v3 w/laser mouse
A1000 Microbotics Starboard II w/2Mb 1080, & external floppy (AIRdrive)
C-128 w/1571, 1750, & Final Cartridge III+
 

Offline Lex

  • Jr. Member
  • **
  • Join Date: Sep 2003
  • Posts: 56
    • Show only replies by Lex
    • http://amiga@resource.cx
Re: 1200 Accel.
« Reply #3 on: November 27, 2006, 07:34:42 PM »
Is it the Pyramid RCA-120?
 amiga.resource.cx/photos/rca120