Author Topic: A1200 hard disk compatibilty, Seems to be hit and miss at seeing em. (Read 1134 times)

Bazzaq · « **on:** August 24, 2006, 10:24:08 PM »

Yo...

Just been adding a 2.5" hd to a stock A1200 KS 3.0.

It did not recognise 3/4 drives at all.. Even one i pulled from my 4000. finally got it to see a 4.3gb Toshiba..

Will upgrading to KS 3.1 make any difference??

Thanks.

Thomas · « **Reply #1 on:** August 25, 2006, 08:18:34 AM »

First check if the HDD is recognised after a reset (Ctrl-A-A). If not, cut the reset line of the HDD cable (the one connected to pin 1 of the motherboard) and check again if it is recognised after a reset.

If any of the above was successful then Kick 3.1 could help.

Bye,
Thomas

Author Topic: A1200 hard disk compatibilty, Seems to be hit and miss at seeing em. (Read 1134 times)

Bazzaq

A1200 hard disk compatibilty, Seems to be hit and miss at seeing em.

Thomas

Re: A1200 hard disk compatibilty, Seems to be hit and miss at seeing em.