Floppy power connector on ELBOX WinnerZIV busboard...

[keropi]

Just got an ELBOX WinnerZIV busboard , and on top of the AT power connectors (P8,P9) there is a small power connector, like the one of floppies... am I supposed to connect it also on the psu?  
anyone knows ?
 :-?  :-?  :-?

[a1200freak]

No, connecting the AT power connectors (P8,P9) on the ZIV is enough. If you plug the Z4 into an Infinitiv tower with the special power connector then you also should connect to that small power connector which gives the +5V and +12V. The missing -12V come from the motherboard to the ZIV. This is an extract from a mounting guideline I got together with the ZIV.

Regards

A1200freak

[keropi]

athough I use an ELBOX winner tower, if I do not connect this input, the amiga does not boot... so I have connected it, and installed also a mediatorZIV and all work fine...

[a1200freak]

I also have an Elbox Winner tower and only connected P8/P9 to the ZIV and the Amiga does boot ?!? ...

[weGuru]

I have a Winner card too..But i havnt connected the AT power to it? Is that bad?

[keropi]

maybe it is my combination of hardware... fastata/dce scandoubler/BPPC these might draw lots of power and maybe the extra input is needed...

and I think it is a bad thing not to connect the power to winnerZIV...

[a1200freak]

I have a CV64/3D with SD, XSurf, Catweasel and a BPPC but dont need the small power connector.

I would recommend to use the P8/P9 AT connectors too. I think its more stable.

[weGuru]

I've got a brown power soldet at the motherboard from the powersuply. Should I Remove that before i Plug in the power to the Winner board?

[x56h34]

The extra floppy power connector on Z-IV busboard is intended for users with BVision cards. It basically adds extra power for BVision, if you plug a PSU floppy power plug into it. That's what it says in the manual. :-)

[weGuru]

Can anybody mail med the manual or something? I bought the Winner card 2nd Hand...With no manual

[keropi]

a manual would be great...

[BinoX]

Yeah.. a manual would be good...
Maybe I could figure what's up with mine then

[lopos]

BinoX wrote:
Yeah.. a manual would be good...
Maybe I could figure what's up with mine then

Hey there. just found this. :-D
Mediator QIQ. It's in pdf format.
Might be of some help.

[x56h34]

keropi wrote:
a manual would be great...

I have a hard copy of the manual. Perhaps I could take some digital photos of it over the weekend and send it to you guys. I think it should be good enough, as far as image quality is conserned.

[keropi]

yeah! rapidshare it!!!! nice!  :-D  :-D