Hello there!!
Im busy putting the final touches to an A4000D to re-launch an old BBS. One stumbling block is getting my Nakamichi 7 Disk CD Changer to work with CacheCDFS.
The DosDriver entry that gets the first CD in the changer going is below (ID 4 LUN 0). This works fine but of course is only for the first disk in the changer.
What changes to this mounlist do I need to make to get CD01: etc to be recognised (ie ID 4 LUN 1,2,3,4,5 and 6)?
Many thanks
Paul (Hybrid/Digital Candy)
/***************************************************************/
/* CacheCDFS mountlist entry © 1993 Elaborate Bytes, O. Kastl */
/***************************************************************/
FileSystem = L:CacheCDFS /* The name of the game */
Device = "cybscsi.device" /* Name of exec device driver */
Unit = 4 /* exec device unit */
Flags = 0 /* OpenDevice flags */
BlocksPerTrack = 351000 /* Unused */
BlockSize = 2048 /* True, but unused */
Mask = 0x7ffffffe /* Memory mask for direct read */
MaxTransfer = 0x100000 /* Maximum amount of bytes for direct read */
Reserved = 0 /* Unused */
Interleave = 0 /* Unused */
LowCyl = 0 /* Unused */
HighCyl = 0 /* Unused */
Surfaces = 1 /* Unused */
Buffers = 50 /* Number of cache lines */
BufMemType = 1 /* MEMF_PUBLIC */
GlobVec = -1 /* Do not change! */
Mount = 1 /* Mount it immediately */
Priority = 10 /* Priority of FileSystem task */
DosType = 0x43443031 /* Currently unused */
StackSize = 3000 /* Minimum stack required is 3000! */
Control = "MD=0 LC=1 DC=8 L LV AL LFC=1 S NC"
/* The Control field is for special adjustments */
/* L/S convert all file/volume names to lowercase */
/* LV/S convert volume names to lowercase */
/* AL/S Auto-Lower converts only non-Amiga CDs */
/* LFC/N start converting at this character */
/* LC/N/A number of blocks per cache line */
/* DC/N/A number of cache lines for the data cache */
/* MD/N/A number of blocks, when starting direct read, not using */
/* the cache. 0 will be a reasonable default (LC*DC+1) */
/* S/S Do SCSI direct commands, no Trackdisk like commands! */
/* NC/S Do NOT use TD_ADDCHANGEINT, poll for DiskChange! */
/* M/S Issue a TD_MOTOR (OFF) command after read */
