Welcome, Guest. Please login or register.

Author Topic: Centronics Printer Port  (Read 1061 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline A1200PowerTopic starter

  • Full Member
  • ***
  • Join Date: Mar 2004
  • Posts: 110
    • Show only replies by A1200Power
    • http://Iets met chello :-)
Centronics Printer Port
« on: April 02, 2006, 05:28:12 PM »
Hi Guys,

I have got myself an old Hp Deskjet 500 printer for the amiga. I was gonna plan to use it with Turbo Print, still is good enough for me.

Though i can remember that there was a problem when connecting a pinter to the amiga, it cause's one of the two CIA's to blow up.

So does anyone rembember what wire to cut. (had something to do with the +5 volt)

Greetz Henk
#A500+ / GVP030@40MHZ / MULTIVISION 500
#1200 / BLIZ 030@50MHZ
#1200T / BLIZ 030@50MHZ / IOBLIX / PICOLLO SD64
#4000D / CS060@50MHZ / STILL ORIGINAL WHITE
#4000D / 040 / FRAMEMACHINE
#4000T / PPC233+060 / CV64/3D / MULTI IO / VLAB-M
 

Offline leofoe

  • Sr. Member
  • ****
  • Join Date: Jun 2005
  • Posts: 499
    • Show only replies by leofoe
Re: Centronics Printer Port
« Reply #1 on: April 02, 2006, 05:33:03 PM »
For all Amiga's except the A1000 disconnect pin 14.
 

Offline A1200PowerTopic starter

  • Full Member
  • ***
  • Join Date: Mar 2004
  • Posts: 110
    • Show only replies by A1200Power
    • http://Iets met chello :-)
Re: Centronics Printer Port
« Reply #2 on: April 02, 2006, 05:47:38 PM »
Wow Fast reply,

Thanxx a lot gonna try it right away

#A500+ / GVP030@40MHZ / MULTIVISION 500
#1200 / BLIZ 030@50MHZ
#1200T / BLIZ 030@50MHZ / IOBLIX / PICOLLO SD64
#4000D / CS060@50MHZ / STILL ORIGINAL WHITE
#4000D / 040 / FRAMEMACHINE
#4000T / PPC233+060 / CV64/3D / MULTI IO / VLAB-M