Welcome, Guest. Please login or register.
Forums
« previous next »
Pages: [1]   Go Down

Author Topic: How to switch from Blizzard1260 to BlizzardPPC with RBM Towerhawk onboard ex II?  (Read 945 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline padrinoTopic starter

  • Newbie
  • *
  • Join Date: Jul 2003
  • Posts: 6
    • Show only replies by padrino
    • http://cattaneo.de
How to switch from Blizzard1260 to BlizzardPPC with RBM Towerhawk onboard ex II?
« on: September 22, 2005, 01:32:26 PM »
Hi,

using the "new" RBM-Tower (with onboard) for years, quite successful. Now I wanted to remove the Blizzard1260 and replace it by an BlizzardPPC(060).
The problem, all my Zorro-Cards are gone now (well, there are only CV3D and x-surf ;)).
I remember something about jumpers to set, but I don't have access to my manual (at my parents or lost).

So, I wonder, does anyone know if there are jumpers to be set, differently than for the B1260?

Help would be more than welcome. ;-)

CU,
Mario
Logged
**********  AMIGA - More Than Just Standard  **********
 

Offline doctorq

  • Hero Member
  • *****
  • Join Date: Aug 2003
  • Posts: 2082
    • Show only replies by doctorq
Re: How to switch from Blizzard1260 to BlizzardPPC with RBM Towerhawk onboard ex II?
« Reply #1 on: September 22, 2005, 02:25:02 PM »
The manual can be found here. I'm sure it will reveal the solution for you :-)
Logged
 

Offline padrinoTopic starter

  • Newbie
  • *
  • Join Date: Jul 2003
  • Posts: 6
    • Show only replies by padrino
    • http://cattaneo.de
Re: How to switch from Blizzard1260 to BlizzardPPC with RBM Towerhawk onboard ex II?
« Reply #2 on: September 26, 2005, 02:19:05 AM »
Hi,

thanks, found the right jumper-setting. Case closed. ;-)

CU,
Mario
Logged
**********  AMIGA - More Than Just Standard  **********
 
Pages: [1]   Go Up
« previous next »