Mediator, Voodoo & Monitor Probs

[milesunder]

Morning All

I wonder if anyone can help, I am having problems with getting an output to either my Hansol 710P CRT or Illyama E381 TFT monitors from my Voodoo3 Graphics Card.  I have performed a clean install of OS3.9 from OS3.0 using a emergency boot disk.  I then installed Picasso96 installed the Cybervision64 3D driver, went back through the installation and changed the monitor freq(I guess this might be a problem as I set it to the highest refresh rate). I then installed the mediator software and renamed Cvision3D to Voodoo.  I then went into Picasso96 Screen mode, this is where I am having the trouble as I don't know what the monitor settings should be. I am getting a signal through to both of the monitors because if I set the refresh rate too low on the TFT the monitor displays its own error message.  

Am I choosing the wrong settings, if so could somebody supply them.  I have noticed and I don't know if this is related but the Picasso install, installed a program called PVS, when I try to open it it tells me that it cannot find the file "Mui(something else).libary" or something like that.  Could this be causing a problem.

I also thought it might have something to do with the mediator as I am unable to use the Mediator config program supplied on the CD as everytime I click on the button it asks for "C:installer" the only program similar to this I have in my C: draw is "C:Install". Any clues

Any help would be gratefully received :-?

Many thanks

Lee

Amiga 4000D 040 25MHZ Quaddoubler, 16MB Ram, Mediator 4000Di , Voodoo 3 2000

[Boot_WB]

Hi, The installer program is on the CD amigaos3.9:OS-version3.9/workbench3.5/utilities/installer.  
Just drag and drop this to your sys:c directory.  Any program with an installation script wil need you to have this in your c directory.
It sounds like this PVS program requires you to have MUI installed - if you have any coverdisks (CDs) most tend to have a version of MUI included.  Alternatively you can download it from  http://main.aminet.net/util/libs/mui38usr.lha however it's 1 meg so you'll either need to connect your miggy to the net, or unpack the file on your pc side and port bits of it across at a time on a crossdos disk.

As to the rest, I haven't got my mediator installed yet, so good luck on that.  When you get it working please post a description to help others in the future who may have similar problems.

[Framiga]

Hi

yes PVS and others P96 components, requires MUI 3.8 correctly installed.

About the "Installer" program, you can find it on AmigaOS3.9 CD or inside the P96 archive (copy it in C:)

http://vgr.tc3net.com/picasso/Picasso96-2_1b.lha

EDIT- oops . . . as never said :-)