Author Topic: Light at the end of the tunnel for Early startup screen probs. (Read 1545 times)

J-Golden · « **on:** February 26, 2005, 06:42:26 PM »

I've Finally figured out the prblems for MOST of my early startup sceen probs. listed in this post:

http://www.amiga.org/forums/showthread.php?t=14349

BUT! Does anyone know how to change, if possible the screenmode used for hte Cyberstorm Early startup screen?

TANKZ in advance.....

Matt_H · « **Reply #1 on:** February 26, 2005, 09:29:42 PM »

You mean the one you get by holding down Esc during a reboot?

Pressing space will switch the mode over to a 15KHz HiResLaced mode.

J-Golden · « **Reply #2 on:** February 28, 2005, 06:28:29 AM »

Quote

Matt_H wrote:
You mean the one you get by holding down Esc during a reboot?

Pressing space will switch the mode over to a 15KHz HiResLaced mode.

it won't switch, I tried that...

It's just a constant double imaged screen mode.

Framiga · « **Reply #3 on:** February 28, 2005, 08:41:51 AM »

Which version of the FlashRom firmware do you have installed?

Type in a shell:

version cybppc.device full

and post here the output

J-Golden · « **Reply #4 on:** March 01, 2005, 07:05:18 AM »

it says:

cybppc.device 44.60 (09/27/1998)
C 1997-1998 by Phase5, written by Ralph Schmidt

is that the laterst ver.?

Author Topic: Light at the end of the tunnel for Early startup screen probs. (Read 1545 times)

J-Golden

Light at the end of the tunnel for Early startup screen probs.

Matt_H

Re: Light at the end of the tunnel for Early startup screen probs.

J-Golden

Re: Light at the end of the tunnel for Early startup screen probs.

Framiga

Re: Light at the end of the tunnel for Early startup screen probs.

J-Golden

Re: Light at the end of the tunnel for Early startup screen probs.