A500 video trouble

[thomasM74]

Hello people

Here I am, addressing the community with one good question: my A500 is in trouble, what could it be?

Got one A500, Revision 6A, Kick 1.3, green power LED, working great until one given day when it ceased working properly.

I made two videos about it:
http://youtu.be/SAUozKBpS4s (showing the "hand" boot logo)
http://youtu.be/0-PI-1Vgako (a demo called "Copper Master" by Angels, 1991)

As you can see, there is a boot image but it comes and goes, with garbled pix in between
The system actually boots (of course no image, or weird pixels, mostly black) and most of the time ends with the power LED dimming 6 times + reboot (i think)

Now the second video is really charming. The copper bars actually show up absolutely perfect but everything else is garbled. Even sound is working although, when there is garbled video data on the screen, the music also sounds weird. Finally the demo stops when it comes to the copper wiggle.

Now the 1000 point question: what's wrong?
Copper bars working but other graphics no...

Did all these test with the 512KB expansion board removed.
Generally it behaves the same with 1MB RAM, although I must say the the hand boot logo no longer shows up like in first video. The screen remains white almost all the time.

Finally, thanks for patience reading this long story and looking forward for a helping hand.

Thomas

[thomasM74]

Thanks so far for advices.
Right now I'm beyond re-seating... but will try it maybe again.
About hotness and sexyness of such video, I can only agree so far it's someone else-es Amiga :laugh1: :laugh1:  (although I wish well to all amigas out there)

I did try the logical approach, but do not know the hardware that good.

Since the copper bar colors are perfect I surely can consider all the analogic video part OK (hybrid chip and all around)

Remains Denise or Agnus ... I would vote for Agnus ... just waiting for opinions before going on the hunt for a replacement chip.

Thomas

[thomasM74]

Final verdict ... the Agnus is not working. Replaced it and now everything's ok.

Although the PLCC socket was and is not in really good shape.

Thomas

[thomasM74]

With a new Agnus, it works fine (for now).
Definitely will replace the socket one day.