Squirrel SCSI CD ROM Drive not working on A1200

[ramparts]

i am having the same issue but my problem is the cable i have to replace it by opening the squirrel ,while moving cables it detected on the scsimounter ,i have also to internally put shunt on unit 2 ,and on the parity for it to detect ,put the active terminator and detected but changing the cd0 to cd 2 and unit=3 and device=squirrell.scsi
the cd icon didn´t appear i think i must replace the cable first then going deep inthe question :rtfm:

[ramparts]

yep that´s it if i had come to the site soon ....i had realised that my self the only problem is my lacie i bought had id select and i had to shunt directly because i didn´t know after i took for clean how to conect again

[ramparts]

i want a spare accelerator TOOOO
and my mtec 1230 i have to unplug it because the zorro 2 scsi expansion conflicts with squirrel scsi

[ramparts]

it could be coonflit as mine is terminated by active and internally because i couldn´t figure out how to conect id selector again on the drive i had to unplug my mtec  as the accellerator have zorro 2 expansion and conflits with squirrel fortunatly mtec has a turbo selector that enables card but not card clock i am going to try it later