Crumb wrote:
I'm using a cbm 286 bridgeboard to activate the isa slots of my 4000T with an NE2000 without problems...
You can use your 3com too if you find a cbm bridgeboard... a 286 or 386 would be a good idea, 8086 ones use 8 bit isas and you may have problems, I don't know...
download etherbridge.lha from Aminet.
This *is* doable??? Aigh, I wish I'd known this when my accellerated 2000 was sitting next to me!
Care to elaborate on the minimum/maximum requirements?
I had a 2286 I'd popped a 286-to-486(SLC?) 'chip' into, but never fabricated a good solution to extend the daughtercard the extra inch above the riser.
