voodoo3/bppc/warp3d problem agayn ;)

[kas1e]

Some time ago my voodoo3 was dead. I rechange it to voodoo banshe(which do not have 3d drviers under aos, only 2d). So, today i buy old voodoo3 agayn, and found interesting problem, ppc/warp3d do not want to work.

All 68k apps under warp3d work fine. (for example gears68k in full screen, in small window,etc).

Under ppc i set MMU mode to NO (always setting it for ppc/warp3d stuff). And test how work my warpos with 'voxelspace' demo. Work just fine.

but. if i run gearsppc_window, i have open MiniGl window with gray color. And gears work, system work, but only grey color in minigl window. If press ESC from it, i have;

12.work:Warp3D/Demo> execute gears_ppc-window
146 frames drawn, for a total of 4734928.000000 microseconds
Took approximately 32431.013699 microseconds per frame
Avarage FPS: 30.834682
12.work:Warp3D/Demo>

Well all work, but only green color in window..
For gearsppc_small the same result. Work, but only grey color.

If i run gearsppc in full screen, i have grey color on full screen, and fast grey/black screen flashesh.


Well, can anyone some help me with it ?

[kas1e]

Anyone ? Maybe problem in my new 060 cpu (some time ago was 040) and need 'good' 68060.library ? Or maybe some kind of settings in bppc boot menu ?

[kas1e]

>Does the new 060 have a full working FPU?
I think yes, becouse all 68k programms/demos/etc work fine (including ppc progs too, (without warp3d of course)).

>BlizzardPPC BootMenu
here is all in ON for 60ns.

>WarpOS settings:

debug - 0
earlyterm - 0
force - 1
gfxaddr - $2000000
hidewarning - 0
memprot - 0
nopatch - 0
noppc - 0
seginfo - 100
terminator - 2

From pciinfo:

   MemSpace0: $80000000 - $81ffffff
   MemSpace1: $82000000 - $83ffffff
   IOSpace2: $eb6400 - $eb64ff
   RomSpace: $84000000 - $8400ffff


Well, the same result


btw, i do not have any 68060.library in LIBS: , but sys monitors said that 68060.library version 46.5 already loaded. From ? From bppc flash ?

[kas1e]

if anyone interesting i solved this problem with help from elbox.


Remove these files (these libraries are for A3/4000 only):
 
> Mediator A3/4000 Warp3D files (If installed)
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> Libs:Warp3D/GFXdrivers/W3D_Picasso96.library - 4.2
> Libs:Warp3D/GFXdrivers/W3D_Picasso96_PPC.library - 4.2
> Libs:Warp3D/HWdrivers/W3D_AvengerBE.library - 4.2
> Libs:Warp3D/HWdrivers/W3D_AvengerBE_PPC.library - 4.2
> Libs:Warp3D/HWdrivers/W3D_AvengerLE.library - 4.2
> Libs:Warp3D/HWdrivers/W3D_AvengerLE_PPC.library - 4.2

After removing all ppc/warp3d prods work fine. Strange , under 040 it was work good .. anyway problem is solved.  Thanks to all.