Apower desktop PSU for A500/600/1200/cd32 are Back!

[AmigaClassicRule]

Hi all,
  I have been toiling away and searching the world for connectors and have managed to finish building and testing 51 new heavy duty power supplies for the A500/600/1200 and cd32! I have them listed with different color labels(they are all the same psu,just a choice of label colors). I have managed to setup a shopping cart to automate this.

PLEASE make sure your PAYPAL account is verified/confirmed before ordering,failure to do so will delay your order and cause me major headaches! - thanks!

http://www.amiga.org/forums/attachment.php?attachmentid=1250&stc=1&d=1302220256

Here are the specs:
------------------
Much smaller than the original.

Works on any voltage from any country 100vac to 240vac. 50 or 60hz

Much more powerful than the original power supply (7AMPS on +5v,1.5Amps on +12v,and .3Amps on -12v).

Uses a standard IEC power cord from any printer or computer(ships with USA cord only).

Completely quiet and no fans.

Lighted power switch - know when its on or off,unlike the original!

Overload Protected - Auto reset when overload is cleared up

Short Protected - Goes into a pulse mode until the short is fixed.Auto reset when short is fixed.

These are intended for desktop machines only, NOT towered machines with zorro/pci expansions!

http://www.amiga.org/forums/attachment.php?attachmentid=1251&stc=1&d=1302220329

The second surprise is i have secured a boatload of brand new 3.5" scsi 5-slot card readers!.so what you say? Well these are great for adding compact flash,sdhc,smartmedia,or to your amiga with scsi to use as a hard drive,or even using all 5 slots filled with different cards(a different os on each? mac/pctask partitions?hmm). i have tested them in the A590,gvp A530,HCII+8,on old trumpcards,warpengine,gvp A2000 cards/accelerators,ivs vector,fastlane z3,A4000t scsi,A3000t scsi.these also work on some atari and apple and sampler scsi! they have the latest firmwares and you can hook them right to your 50 pin scsi without any adapters.The bolt anywhere a floppy drive will in most cases.can be put internal in place of the hard drive.all 5 slots fall under 1 SCSI ID with luns..i also have some scsi cables and assorted stuff there,when its gone its gone.

I have set up a online shopping cart with SSL to avoid EBAY this time and the crazy fee's. this also automates the shipping etc and saves me alot of headaches.The price for the power supplies is $42+ shipping(sorry,after the first batch,i tallied the stuff up and made almost nothing after fee's!). Actual shipping is calculated on the shopping cart.Shipping to most of europe/uk etc is around $14 via USPS flatrate small BOX. USA shipping is also calculated.Payment is by PAYPAL only and the cart passes you off to the secure paypal site.
Please understand,i can't control customs and such,but i can guarantee you i shipped the stuff the next morning after you order it!

Oh,you can find these power supplies at http://www.a4000t.com or https://a4000t.com/store  they both go to the same place

if anyone has any questions,please feel free to ask.
Mech

I have questions about the SCSI card reader:

• I have an Amiga 500 with kickstart 1.3, 512 KB of RAM and 8 MB fast ram, will this work on this Amiga setting or do I need to also upgrade my kickstart from 1.3 to 3.1?
• If this works on number 1 setting, I own an Amiga A500-HD+ does it work on this device? If so, how do you install it? Does it work as an external device and fits on the DB 25 SCSI or needs to be fit inside? If it needs to be fit inside, can the case of the A500-HD+ fit correctly and close well with this CF card reader inside?
• Where would I get the cable for the card reader so it works on my Amiga A500-HD+, thanks in advance?