Concierto I/O board question

[amiga2000]

Hi - for a while the audio output on my Concierto board has been cutting in/out, but it seemed to correct itself if I tapped the back connector going into the audio out of the Concierto I/O board. It finally "died" in a way - it only gives audio mono output. I took out and looked at the I/O board (the part of the Concierto which carries the audio and MIDI connectors, and is connected to the main Concierto card by a cable), and it looks like a metal wire leading from the audio out connector to the I/O board broke off. My question is: are these "I/O boards" something particular to the Concierto, or are they available from somewhere?

I was thinking that maybe other Amiga clockport sound cards use similar I/O backplates and I could just buy one of those to replace?

Thanks.

[amiga2000]

I was thinking about trying to solder a new audio port into the I/O board, but I feel I might melt any nearby circuitry.

Following are my AHI/concierto versions as far as I can tell. Honestly, I feel like I rarely use the concierto audio itself - only in terms on audio capture with the paloma... In terms of using it for audio playback, I think I rarely access it.

ahi.device 4.180
concierto.audio 4.28

AHI configured as default for Concierto:
22.05 kHz frequency
Concierto 8 bit stereo ++

Yes, the beep is normal on bootup - I think I actually get it twice or 3 times due to OS3.9. AmigaAMP works fine for me.

Roy