Laser Show Designer 1000

[laserist21]

I Need LHA Help. I bought an Amiga 500 and Workbench 1.3 Just to run the shareware laser projection software LSD1000 availible online at:
http://www.pangolin.com/products/pricelist-lsd1000.htm
Unfortunately Workbench 1.3 Does not have LHA decompression. Can I Get someone who is generous einough to download the software and drop it in the mail to contact me.
I would greatly appreciate it and gladly front you any expences.
Thanks,
Jonathan
 :-?

[laserist21]

I am at jonathanwelch@hotmail.com
But I am not sure how I can get the program to my computer without Cross-Dos. Sorry I am new to Amiga. If you could direct me that would be great!
Thanks,
Jonathan

[laserist21]

If you mean laser hardware I have had the best luck on ebay. You just need to know what to look for.
A good set of galvos (Cambridge or closed loop GSI)
drivers for the galvos
Red green and blue lasers for full color
and a system to controll it all (I am using Alpha 2000 on PC because I can't get my amiga to work.)
It is a very expensive hobby, but I have the coolest apartment on campus.
If you need product advise I would be happy to help. I have done verry well.
I have an Argon laser (130mW blue or green) $250
A dpss laser (green 20mW) $300
A HeNe laser (30mW red) $150
A pair of cambridge galvos 6810 $10 (retail $600, they where mis-filed)
and the alphalite software w/DAC $150

[laserist21]

No it was a money pit. I bought the software from pangolin for $50, an amiga for another $65, and paid another $125 for a system with the modification and software that I never recieved. I finally opted for an inexpensive PC baised software for under $200 (alpha2000) on ebay and it works great.
If you want to build your own dac circut cellar posted an article a couple years ago called "The Lasr Billboard" which I put together for $50 in parts and the free software availible on there sight. It works but is limited.
I will look for the links and add them to my site within the next couple days.
http://home.columbus.rr.com/osucampuszoo/
turn down the volume before entering (it is a little loud)
Good luck,
Jonathan  (J.D.) Welch :-)

[laserist21]

No the amiga I got will not run the software. I think it is the RAM. not sure. I have just under 1 meg with workbench running.
I am just looking for a good driver for my galvos right now. I have 2 X cambridge 6810's with no drivers and one GSI GS325 with the driver. The cheapo galvo's for $20 on ebay cannot do graphics and I am having trouble tuning the GSI. I still have much to buy.