Welcome, Guest. Please login or register.
Forums
« previous next »
Pages: [1]   Go Down

Author Topic: os4.0 and csppc drives  (Read 3226 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline HammerD

Re: os4.0 and csppc drives
« on: December 31, 2007, 05:16:56 AM »
@thread

The CS PPC scsi controller is supported and works.  I am booting OS4 classic off the hard drive attached to my CS PPC's scsi controller...so I can confirm it works.

I don't know why this poster's isn't booting.  If it boots successfully into OS 3.9 with the same hardware setup then I don't see why it would not also work with OS4.
Logged
AmigaOS 4.x Beta Tester - Classic Amiga enthusiast - http://www.hd-zone.com is my Amiga Blog, check it out!
 

Offline HammerD

Re: os4.0 and csppc drives
« Reply #1 on: January 08, 2008, 09:25:48 PM »
@amiga4001

I have the exact same problem with my CS PPC.  So I bolted down a heatsink on top of the PPC and made it very tight...now it is much better.  Not 100% perfect, but better.

Logged
AmigaOS 4.x Beta Tester - Classic Amiga enthusiast - http://www.hd-zone.com is my Amiga Blog, check it out!
 
Pages: [1]   Go Up
« previous next »