AmigaOS 4.1 Final Edition Update 1 Now Available

[nicholas]

Fresh install of FE on UAE went fine, installed the Extras with no problem, configured uaegfx and uaenet.device without issue, installed Update 1 and it's now as stable as a house of cards in a hurricane. :/

Don't want to risk my Peg2 without taking backups first.

[nicholas]

Seems to work well on FS-UAE on my Macbook, nice to see 640MB of RAM instead of just 128MB

I've only got 2MB chip and 128MB on the emulated csppc.

Will have a play around at some point to see what I can do.

[nicholas]

@nicholas

works great on my peg2. it must be said again and again that winuae is *not* a supported platform, and there is no guarantee any of toni's latest changes will be work with the OS.

-- eliyahu

Will install it on the Peg2 at some point. Time being the main obstacle as usual. :/

[nicholas]

You give it 512MB of Zorro3 RAM and edit startup-sequence, so the line with BootLoader says...

Code: [Select]

C:BootLoader COMMANDLINE NORAMPAGER

Muchas gracias.

[nicholas]

P96 still working for me.  I have a 1920x1080 @ 32 bit workbench, network/internet still working as well.

Config (not at  home so off memory) is

A4000T system/rom/chipset/NTSC
CyberstormPPC w/128 MB
CyberSCSI.device handling System drive, Work drive and CDrom
UAEGfx w/64 MB
A2065 Nic with "ethernet.device" as the driver
Chip ram - 2 MB
#1 Z3 Ram - 512 MB
#2 Z3 Ram - 512 MB

Is there any particular reason to emulate an A2065 instead of using uaenet.device?  I'm thinking the instability of my setup state started when I enabled networking.

It's so unstable I can't even run AmiUpdate without it locking up then crashing UAE.