Welcome, Guest. Please login or register.
Forums
« previous next »
Pages: [1]   Go Down

Author Topic: A3000 LED lights/board  (Read 2581 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline amiman99

Re: A3000 LED lights/board
« on: May 26, 2017, 05:24:52 PM »
I made a replacement few years back, let me see if I still have the files somewhere on my PC.
Logged
A500 KS 2.1, 1MB Chip, 68000
A600 KS 3.1, 2MB Chip, ACA630 32MB RAM
A1000 KS 1.3, 8MB RAM
A1200 KS 3.1, Blizzard IV 50MHz 64MB RAM
A2000 KS 2.1, 68030 25MHz, 6MB RAM
A3000 KS 3.1, 68030 25MHz, 16MB RAM
A4000 KS 3.0, 68040 25MHz, 16MB RAM
CDTV KS 3.1, 4MB RAM
CD32
(AROS BOX) Dead :(
 

Offline amiman99

Re: A3000 LED lights/board
« Reply #1 on: May 26, 2017, 05:47:38 PM »
I found it!
It'a PDF file you can print on a special paper on Laser Printer and then iron on PCB.
Use 2 Square LEDs on each side, orientation of the LEDs...check the previous post picture.

PS. don't mind the second PCB, it's not related.
Logged
A500 KS 2.1, 1MB Chip, 68000
A600 KS 3.1, 2MB Chip, ACA630 32MB RAM
A1000 KS 1.3, 8MB RAM
A1200 KS 3.1, Blizzard IV 50MHz 64MB RAM
A2000 KS 2.1, 68030 25MHz, 6MB RAM
A3000 KS 3.1, 68030 25MHz, 16MB RAM
A4000 KS 3.0, 68040 25MHz, 16MB RAM
CDTV KS 3.1, 4MB RAM
CD32
(AROS BOX) Dead :(
 

Offline amiman99

Re: A3000 LED lights/board
« Reply #2 on: May 26, 2017, 09:47:08 PM »
I used 2xRED and 2xGREEN rectangle LEDs 5mm x 2mm and 7mm height.

Something like this: https://www.google.com/search?q=2x5x7mm+Rectangle+Green+led&ie=utf-8&oe=utf-8
Original dual LED dimensions are 10x2x8mm

I hope it helps.
Logged
A500 KS 2.1, 1MB Chip, 68000
A600 KS 3.1, 2MB Chip, ACA630 32MB RAM
A1000 KS 1.3, 8MB RAM
A1200 KS 3.1, Blizzard IV 50MHz 64MB RAM
A2000 KS 2.1, 68030 25MHz, 6MB RAM
A3000 KS 3.1, 68030 25MHz, 16MB RAM
A4000 KS 3.0, 68040 25MHz, 16MB RAM
CDTV KS 3.1, 4MB RAM
CD32
(AROS BOX) Dead :(
 
Pages: [1]   Go Up
« previous next »