Welcome, Guest. Please login or register.

Author Topic: SupraDrive Wordsync A2000 help!  (Read 4122 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline amiman99

Re: SupraDrive Wordsync A2000 help!
« on: April 16, 2014, 01:09:24 AM »
I have the same card and they are correct that P4 is NOT for HD power.

Did you try to move AUTO jumper to NO position?
Mine for some reason, can not AUTOBOOT, it only works when booted from floppy disk first.
A500 KS 2.1, 1MB Chip, 68000
A600 KS 3.1, 2MB Chip, ACA630 32MB RAM
A1000 KS 1.3, 8MB RAM
A1200 KS 3.1, Blizzard IV 50MHz 64MB RAM
A2000 KS 2.1, 68030 25MHz, 6MB RAM
A3000 KS 3.1, 68030 25MHz, 16MB RAM
A4000 KS 3.0, 68040 25MHz, 16MB RAM
CDTV KS 3.1, 4MB RAM
CD32
(AROS BOX) Dead :(
 

Offline amiman99

Re: SupraDrive Wordsync A2000 help!
« Reply #1 on: April 18, 2014, 04:36:49 AM »
@Fireb0y

Are you able to make disks from ADF?
If you do, I can make you copy of my Supra boot disk that allows to boot from floppy and then continue to  boot using the HD.
Worked fine last time I used it. I'm pretty sure I can find it somewhere.

I also would recommend that you should find yourself another SCSI controller, because this one sucks. Commodore A2091 is way better and has some Fast Ram on board too.
A500 KS 2.1, 1MB Chip, 68000
A600 KS 3.1, 2MB Chip, ACA630 32MB RAM
A1000 KS 1.3, 8MB RAM
A1200 KS 3.1, Blizzard IV 50MHz 64MB RAM
A2000 KS 2.1, 68030 25MHz, 6MB RAM
A3000 KS 3.1, 68030 25MHz, 16MB RAM
A4000 KS 3.0, 68040 25MHz, 16MB RAM
CDTV KS 3.1, 4MB RAM
CD32
(AROS BOX) Dead :(