FS: Restored Amiga 3000

[amiman99]

For sale restored Amiga 3000 25MHz with 2MB chip RAM and 4MB fast RAM, 3.1 ROM OS3.1 installed on 2GB Hard drive with 2 partitions. MB REV 9.
I would prefer locally first, but if there are no takers then I'll ship (I need to find a suitable box first and it can take some time)

No keyboard and no mouse included, only the A3000.

$175 plus shipping or free pickup

I made some pictures detailing the restore process.

The stuff that was broken:
1. Front of the case was ripped, fixed by using plumbers putty, dries to a rock solid compound.
2. LED board, snapped in half, I made a new one by copying it, see pics.
3. The IC chip that multiplexes the joystick signals was improperly de-soldered making a damage to MB. The traces and Eyelets were damaged. Fixed by rerouting the signal by using external wires.
4. There is a battery leak damage, but is not causing any problems.
5. Missing Floppy drive eject button, could not find one, but I think you can get it from Shapeways (3D printing service)
6. Power button was broken, used shrink tubing to keep it together.
7. Missing floppy drive cover.
8. VGA stand off on the back of the Amiga is broken and can't be removed.
9. Missing plastic clips that hold the plastic barrier and daughter card together.
10. Maybe 1 or 2 screws missing from inside, there is alot of screws inside to track, iykwim.

[amiman99]

LED Board:
Before and after

[amiman99]

Broken face plate and power button fix

[amiman99]

Broken traces

[amiman99]

Fixed traces

[amiman99]

Pic of the battery damage and replacement.

[amiman99]

amiman
I may be interested in the unit depending on shipping costs to CA. Please send me PM

Also, would it be possible for u to fabricate another one of those A3000 led panels?

Do you do amiga repairs? I* have an A4000 motherboard that needs fixing having a hard time to find someone in north america.
Thannks

I don't have a box yet, so I'm not sure what the dimensions would be for shipping purposes.
The LED board is hand made. It took awhile to make it, I could make another one (maybe), with or without the LEDs? LEDs are from Radio Shack.
The process is kinda slow, like, print the layout, cut the PCB, Iron the layout, soak in water, etch the copper, clean the board, tint the copper, drill holes, solder LEDs and wire.


As far as repair, I can only fix what is visibly broken. I was able to fix my other A3000 due to the battery damage by re-flowing the solder joints with new solder. It seems to work fine so far.

[amiman99]

Beautiful system, and great work getting her running again!  Impressed that you took so many photos, I can tell this was really a labor of love for you and I hope you find a fantastic home for her.  If I wasn't in Virginia and shipping probably even more expensive I might almost be tempted to get in line behind Magnetic for it, LOL.  

I knew that it will be a lot of work, so I took steps to document it.
As you can see from my signature below, I have almost every model made.

[amiman99]

amiman
I may be interested in the unit depending on shipping costs to CA. Please send me PM

Also, would it be possible for u to fabricate another one of those A3000 led panels?

Do you do amiga repairs? I* have an A4000 motherboard that needs fixing having a hard time to find someone in north america.
Thannks

I sent you PM sometime ago and did not get any response, are you still interested? LMK

[amiman99]

The A3000 is SOLD.

@magnetic
I need to do a JTAG board for a GP32, so I can upload new flash to it, when I do that board I'll make another LED board.