Welcome, Guest. Please login or register.
Forums
« previous next »
Pages: [1]   Go Down

Author Topic: Starting from HD  (Read 1498 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline amiman99

Re: Starting from HD
« on: May 24, 2013, 09:50:40 PM »
There could be multiple problems.
If it boots to HD and you only get cli prompt, try to type LOADWB and see if it boots to workbench.
If it does, then probably the Startup-sequence is missing, bad, or renamed.
In WB, in the run command, type ED A and press enter, then do file open, go to S folder and try to find STARTUP-SEQUENCE.
Logged
A500 KS 2.1, 1MB Chip, 68000
A600 KS 3.1, 2MB Chip, ACA630 32MB RAM
A1000 KS 1.3, 8MB RAM
A1200 KS 3.1, Blizzard IV 50MHz 64MB RAM
A2000 KS 2.1, 68030 25MHz, 6MB RAM
A3000 KS 3.1, 68030 25MHz, 16MB RAM
A4000 KS 3.0, 68040 25MHz, 16MB RAM
CDTV KS 3.1, 4MB RAM
CD32
(AROS BOX) Dead :(
 

Offline amiman99

Re: Starting from HD
« Reply #1 on: May 26, 2013, 03:07:59 AM »
Quote from: Musicman;735997
Tried LOADWB and it asks for disc ENV in any drive.......
That's normal, just cancel it.
Now, try to find the startup-sequence.
Logged
A500 KS 2.1, 1MB Chip, 68000
A600 KS 3.1, 2MB Chip, ACA630 32MB RAM
A1000 KS 1.3, 8MB RAM
A1200 KS 3.1, Blizzard IV 50MHz 64MB RAM
A2000 KS 2.1, 68030 25MHz, 6MB RAM
A3000 KS 3.1, 68030 25MHz, 16MB RAM
A4000 KS 3.0, 68040 25MHz, 16MB RAM
CDTV KS 3.1, 4MB RAM
CD32
(AROS BOX) Dead :(
 
Pages: [1]   Go Up
« previous next »