Welcome, Guest. Please login or register.
Forums
« previous next »
Pages: [1]   Go Down

Author Topic: I want to upgrade my momery RAM  (Read 1875 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline amiman99

Re: I want to upgrade my momery RAM
« on: February 16, 2012, 10:01:09 PM »
I dont know where are you located, but here are some ebay results:
http://www.ebay.com/sch/i.html?_from=R40&_trksid=p5197.m570.l1313&_nkw=128mb+EDO+simm&_sacat=See-All-Categories

I guess you need 72 pin SIMM EDO or FastPage Mode.

I think my Blizzard IV take both, and yours is similar.
Logged
A500 KS 2.1, 1MB Chip, 68000
A600 KS 3.1, 2MB Chip, ACA630 32MB RAM
A1000 KS 1.3, 8MB RAM
A1200 KS 3.1, Blizzard IV 50MHz 64MB RAM
A2000 KS 2.1, 68030 25MHz, 6MB RAM
A3000 KS 3.1, 68030 25MHz, 16MB RAM
A4000 KS 3.0, 68040 25MHz, 16MB RAM
CDTV KS 3.1, 4MB RAM
CD32
(AROS BOX) Dead :(
 

Offline amiman99

Re: I want to upgrade my momery RAM
« Reply #1 on: February 16, 2012, 11:59:39 PM »
Quote from: AmigaClassicRule;680749
It says specifically that it needs 1 X 72 pin and it can hold up to 128 MB MAX RAM. Does that mean it is single sided only?

Would this work:http://www.ebay.com/itm/128MB-2X64MB-MEMORY-16X32-72PIN-NON-PARITY-EDO-60NS-5V-RAM-SIMM-/140627893536?pt=LH_DefaultDomain_0&hash=item20be135d20? Does it fit the requirement of 1 x 72 pin?
This auction gives you qty 2 64MB SIMMs for total of 128MB, so no.

Edit: This one may work, but the picture is generic: http://www.ebay.com/itm/128MB-MEMORY-32X32-72PIN-NON-PARITY-FPM-60NS-5V-RAM-SIMM-/130593572400?pt=LH_DefaultDomain_0&hash=item1e67fbc630
« Last Edit: February 17, 2012, 12:03:39 AM by amiman99 »
Logged
A500 KS 2.1, 1MB Chip, 68000
A600 KS 3.1, 2MB Chip, ACA630 32MB RAM
A1000 KS 1.3, 8MB RAM
A1200 KS 3.1, Blizzard IV 50MHz 64MB RAM
A2000 KS 2.1, 68030 25MHz, 6MB RAM
A3000 KS 3.1, 68030 25MHz, 16MB RAM
A4000 KS 3.0, 68040 25MHz, 16MB RAM
CDTV KS 3.1, 4MB RAM
CD32
(AROS BOX) Dead :(
 
Pages: [1]   Go Up
« previous next »