Welcome, Guest. Please login or register.
Forums
« previous next »
Pages: [1]   Go Down

Author Topic: HDToolbox: What should the "Mask" setting be set at?  (Read 6799 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline amiman99

Re: HDToolbox: What should the "Mask" setting be set at?
« on: September 30, 2011, 04:28:37 PM »
0x1FE00 or 0xFE00for IDE devices on A600 and A1200.
SCSI, I'm not sure if is the same.
I had problems with A600 and WHDLoad when upgraded to ACA630, when the values were changed everything worked fine.
Logged
A500 KS 2.1, 1MB Chip, 68000
A600 KS 3.1, 2MB Chip, ACA630 32MB RAM
A1000 KS 1.3, 8MB RAM
A1200 KS 3.1, Blizzard IV 50MHz 64MB RAM
A2000 KS 2.1, 68030 25MHz, 6MB RAM
A3000 KS 3.1, 68030 25MHz, 16MB RAM
A4000 KS 3.0, 68040 25MHz, 16MB RAM
CDTV KS 3.1, 4MB RAM
CD32
(AROS BOX) Dead :(
 

Offline amiman99

Re: HDToolbox: What should the "Mask" setting be set at?
« Reply #1 on: September 30, 2011, 09:50:26 PM »
Quote from: pVC;662000
Mask, not Max transfer...
Darn...:whack:
Logged
A500 KS 2.1, 1MB Chip, 68000
A600 KS 3.1, 2MB Chip, ACA630 32MB RAM
A1000 KS 1.3, 8MB RAM
A1200 KS 3.1, Blizzard IV 50MHz 64MB RAM
A2000 KS 2.1, 68030 25MHz, 6MB RAM
A3000 KS 3.1, 68030 25MHz, 16MB RAM
A4000 KS 3.0, 68040 25MHz, 16MB RAM
CDTV KS 3.1, 4MB RAM
CD32
(AROS BOX) Dead :(
 
Pages: [1]   Go Up
« previous next »