Remapollo for A4060

[utri007]

Of course it works with Apollo 4060.

You tell very little about your problem and setup. Have you read manutal? What 68060.library you are using? What other programs you start early on startup-sequence?

As a alternative you can use MuLibs http://aminet.net/package/util/libs/MMULib

[utri007]

You should use only bb 1&2. Those patches will cause problems.

Use setpach to load bb1 ROM update and remove everything else.

[utri007]

RemApollo also supports 1mb kikcstart. So create custom kickstart using Remus/Romus with everything you need and load it with RemApollo.

[utri007]

RemApollo fixes probolems with some Zorro cards with rebfix switch. RemApollo 1.8 is updated 2012. Aminet has a 1.7 wich is much older.

I have a 1mb physical kickstrat and I use Thoma's MMuLib and MuFastRom to load it fast ram. Works nicely. Thanks Thomas.

[utri007]

Yes, many. Have you tried some of the other programs listed in this thread, or Aminet, SKick, etc.?

You forgot this  - >

I have a 1mb physical kickstrat and I use Thomas' MMuLib and MuFastRom to load it fast ram. Works nicely. Thanks Thomas.

<- those are still supported

There is a problem when stuff is left out from kickstart. It would require special boot floppy wich is not desired situation! It would be very very annoying if there is a boot problem, like hard drive failure etc.