Oh dear i need help :O(

[Gav]

Ok just to cut a long story short i think i have put a startup-sequence line in the wrong place and now my amiga resets.I need to change it with edit pad so i wired my amiga to my tv as my voodoo aint supporting the screen mode the amiga is going in.It goes on about how its trying to shut down the windows then loads in some icons and then resets.It just keeps doing that over and over again,so i loaded wb3.1 in but it wont let me load in edit pad that way.I hope someone can help because as of now i didnt really have a way to backup my hard drive so that is gonna be a lot of work to do if i need to reinstall it..
Thanks
Gav
Actually it cones up software failure then resets.

[Gav]

Ok just forget all of the above as i sorted it but here is my next problem.I moved my tower a bit so im thinking somthing has became slack inside???
Well on the early start up menu under expansion board diagnostic it only has two boards listed???
Before it had three of them,here they are,Board numder 1,manufactuer 2206,product 40,status working...The next one is,Board umber 1,2206,168,working.I dont wanna go poking at it not really knowing what has came off,tho on boot when it resets the screen goes red for a moment.
Thanks

[Gav]

Thanks for the replys ppl
If my rom chip was loose would it still load wb3.1 in or would nothing at all??
I can boot with a floppy but my hd doesnt get very far into loading really and just resets all the time for some reason???

[Gav]

Ok i tried it without the card and yeah it works but says ram disk is full of course.So i try again with the 060 in place but no luck.I then used an 030 card to see what would happen then and it gets upto the workbench screen then flashes a color and resets.Then it loads up again and work but i go into the screenmode and there is only its native modes there to select.So why does it get that far with an 030 but not the 060?Also why are there no other screen modes?It also says cant load mixer.lib which i know is for the soundcard but it is in place.This has me so puzzled i mean all this happend just after that stupid startup like i mucked up with.I really dont get it
Thanks ppl,before it had 3 products in the early startup then once again it only had two and this was with the 1230 attached to it.

[Gav]

Now in the startup are baord 1 & 2 but one number is 8512 and the other is 2206 elbox like you said but which one??Mediator or the power flyer?

Update......Ok forget it because i dont think it is a hardware problem as i just put everything back and all 3 items are in the menu but my amiga keeps crashing.It gets right to the end of the boot i mean even my zip drive gets ready to start then the screen flashes and goes red then keeps reseting with those blizzard 060 colors.
So does anyone know how by me erasing a startup like makes such a huge mess?
See i put the birdie 2000 line in the wrong place which was when i got software failure so i got in there and erased it and put it in its correct place.So all was well i thought but i was wrong.Now i cant even get into os3.9 to see what is wrong since it just resets but why does it get into the os with an 030 and not the 060???
At first it will load then reset with the 030 but then it loads up and as i said i have limted selection of screen modes.If i load wb3.1 i can see all my files but thats pretty much a waste of time really as i cant do much from that.Boot with no startup sequence???Well when i do that i just get a dos screen and thats it..I cant be botherd to install 3.1 and then 3.9 as i dont know what happend to my emergency disk so if anyone has any good ideas then id be very thankful.
Thank you all again.
Gav

[Gav]

Oh i never caught what redrumloa had said before,well i will give that a try later as its now 4:47am so im off to bed soon
...
Thanks

[Gav]

Well Odin also said Thanks again lads,i shall keep you informed on how my travels go lol..

[Gav]

Ok i got it all working again i didnt actually know you could access the start-sequence in the early startup.Im learning something new everyday in here.
Thanks again to you all as id be lost without amiga.org,thanks.
Gav