PPC probs,1D4 most problematic?

[Gav]

Hi
ok i have had random reset problems with my ppc which i have only owned for just over a week.

The reset usualy happens while i'm playing mp via amigaamp/warpup.

This happens every single time without fail,its not if it will happen it's when.

Sometimes it might be seconds of using amigamp other times it could be longer.

Now i have put a fan against the cpu and nothing has changed so far.

i have read that 1D4 boards cause the most probs with the PPC,what are the symptoms??Random resets?Not booting with a CDRW drive?

Any help is appreciated.
Thanks

[Gav]

Hi
No my board is just running at standard 50/240mhz,well i pushed a fan right against the black ppc chip?and the amiga  has been on for 50 mins so far without a crash.

So hopefully this might have solved it?

[Gav]

Ok it has just rest again,the good ol mp3 stutter and then reset.

Right,where is the heatsink on the ppc board exactly?The big black thing right?

[Gav]

Ok then i'll see about replacing the fan,erm most 40mm fans have the 3 pin socket on and the ppc seems to have the 2 pin?

[Gav]

Ah right i'll check it out,Thanks for the help.

[Gav]

Hmm amigakit dont seem to have any 30mm fans at the mo and just the 40mm/80mm.