Welcome, Guest. Please login or register.

Author Topic: Problem: USB port not working???  (Read 1932 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline GavTopic starter

  • Hero Member
  • *****
  • Join Date: Jan 2003
  • Posts: 788
    • Show all replies
Problem: USB port not working???
« on: July 17, 2004, 10:39:41 AM »
Recently, the only usb port on my Gateway laptop stopped working.  My laptop is running on Windows ME.

According to the device manager, it says that the usb port is installed and working properly, but it appears unresponsive when I plug any usb into it and there's no error message that shows up on the screen.

I had tried restoring my whole computer several times.  The first time I restored the system, the usb and modem were not installed properly and I had to do the restoration again.  This time around the PCI audio wouldn't install, due to some Windows conflict, and the usb was then properly installed and worked just fine.  Then my web cam started to not work properly and I thought it was because it was running out of batteries, but it still would not work with the brand new batteries.  I tried the web cam on another computer and it did not work on that either.  Thinking that it was just the web cam, I got a new one, but the usb port was acting dead towards anything plugged in, as I also tried my external harddrive and it worked just fine on another computer.  I'm also thinking that my computer screwed up my old web cam! :(
I restored windows once again, this time the audio worked, and the device manager still says that the usb port is installed and working properly.  I still am not able to install my modem, but I don't use it so I'm not worried about it.

Could it be my operating system?  Or do I need to replace my usb port?   If anyone could help me, I'd really appreciate it!  Thanks =)...
A1200,BPPC603e+@240mhz-060@50mhz/Scsi2 192mb,Powerflyer,Mediator SX,Voodoo 3000,SB128,Tv card,SD/FF,Ethernet,CDRW.
 

Offline GavTopic starter

  • Hero Member
  • *****
  • Join Date: Jan 2003
  • Posts: 788
    • Show all replies
Re: Problem: USB port not working???
« Reply #1 on: July 18, 2004, 03:59:52 AM »
I was told not to get Windows ME..but I had no choice as it came with my laptop.  It was doing okay for a while until I decided to restore the whole system! :(

Well..I'll be getting a copy of Windows 2000 soon and I hope it solves the problem!

Thanks for the replies! :)
A1200,BPPC603e+@240mhz-060@50mhz/Scsi2 192mb,Powerflyer,Mediator SX,Voodoo 3000,SB128,Tv card,SD/FF,Ethernet,CDRW.