How much chipram should amiga 600 have

[mark443]

Hi am a new member, the problem i have is am trying to tranfer adf files from my pc two the amiga 600, but it fails saying the ram disk is full i thought the 600 came with 1mb as standard,have used amiga 500plus the same way with no problems could the a600 memory be defective or something else :confused:
 
My A600 is just standard no memory upgrade when i load workbench nothing else memory reeds 760200 graphics mem 0 other mem is this normal ?
Kind Regards
Mark

[mark443]

Hi no hard drive yet bought a 4gb cf card but can not fit it yet my kickstart is 37.299 just waiting for 37.300 to come through the post nothing else running just the workbench disk sorry tell a lie useing amiga explorer to transfer adf files over two the A600.

[mark443]

Boot it without startup-sequence and start amiga explorer from the cli.

Hi thank's for the info sorry if i sound abit stupid it's my first amiga for over 15 years abit rusty lol how do i start up without a startup-sequence.
Kind Regards
Mark

[mark443]

A stock A600 comes with only 1mb of RAM.  I have an A603 RAM expansion board for sale cheap, if you are interested send me a PMail here.  Otherwise there is a new version named the A604 that will be released in June (hence my reason for wanting to sell my A603 memory expansion board).

It will give your A600 a total of 2mb of Chip RAM, instead of the stock 1mb and it fits into the trap door slot below your A600.

It will be tough to transfer files to your A600 before you get a hard drive or compact flash drive set up and working.  Specially with only the stock 1mb of RAM.

Hi thank's for the info have got the 4gb cf card just waiting for the new kickstart rom two arrive, i just find it odd that it runs out of memory when the A500plus can transfer the adf's no problem with the same 1meg of memory
Kind Regard
 
ps i will pm you for a price on the a603

[mark443]

Hold down both mouse buttons at power up. You'll see a boot without startup requester at the bottom of the boot items screen.

Ok will try thank's for your help

[mark443]

Ok that would explain the running out of memory, feel kind of stupid now.

[mark443]

Unfortunately, you failed to notice TS was talking about an A500+ (plus), which, like the A600, has 1 MB chip mem as standard. Through the trap door, it can be expanded to 2 MB chip mem max, just like the A600.

Apart from that, the standard A500 (without the '+') only has 512 KB chip mem and no fast ram at all. Through the trap door, it can be expanded to 512 KB chip and 512 KB fast (well...) mem ór to 1 MB chip mem.

There's not much technological difference (if any) between an A600 and an A500+, apart from the pcmcia and on board ide-ports.


No, it does not. Any Amiga runs perfectly well without fast ram, although extra fast ram makes it a nicer experience. And yes, there are programs which need fast ram, but for most programs it is just optional. Highly recommended to have some fast ram (4 MB will do nicely in  most cases), though.

Hi thank's for the reply's that's what i thought the A500+ and the A600 are very similar in memory it's like i said i can transfer adf's two the A500+ but not the A600 unless the A600 users more memory to boot the workbench disk i really dont know,i just thought there was something wrong with the A600's memory

[mark443]

No, you're just using too much of it already. If you're booting the two amiga's off the same bootdisk then the difference could be due to extra hardware in the 600 using more memory.
 
Either the IDE or the PCMCIA slot drivers could be using ram, even though they haven't got anything plugged into them. Also having extra floppy disk drives uses more ram.

Ok thank's for the info, i just thought there was something wrong with the A600