Welcome, Guest. Please login or register.

Author Topic: HDD equipped A500 - which WB ?  (Read 6606 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline Lord Aga

  • Sr. Member
  • ****
  • Join Date: May 2011
  • Posts: 396
    • Show all replies
Re: HDD equipped A500 - which WB ?
« on: February 20, 2013, 08:27:04 AM »
Whoaaa it has arrived :)
Picspicspicspicspics :) !

Now... why bother yourself with one choice ? Do all of them !
You'll be using a CF hard drive, right ? Well CF cards are nothing if not easy to swap.
Have a 3.1 (Classic WB) on your main 4GB card, and then have several more on smaller cards. You should be able to find used 256MB CFs for a Lipa, or for free even :) Install WB 1.3 on them just for the fun of it. Feel the ultra retro system :) Then switch back to 3.1 for serious work. Do a mutant system of your own on a third separate card and use it to test and experiment the hell out of Amiga software :)
See... there are no limits !
Glory to the loud-mouthed Scotsman !
 

Offline Lord Aga

  • Sr. Member
  • ****
  • Join Date: May 2011
  • Posts: 396
    • Show all replies
Re: HDD equipped A500 - which WB ?
« Reply #1 on: February 20, 2013, 07:50:37 PM »
Aga to the rescue :)

I remember those HD prep programs being tricky. One would not do the trick, and the other did it just fine.
Sadly, I forgot which one's which :D

On the top of it, I remember some WinUAEs will do the CF prep just fine, and some wont. I think 2310 is the safe bet.
Something to do with not saving the changes correctly or... ?
Anyway, 2310 + one of those HD prep utils will do the trick.
« Last Edit: February 20, 2013, 07:55:42 PM by Lord Aga »
Glory to the loud-mouthed Scotsman !
 

Offline Lord Aga

  • Sr. Member
  • ****
  • Join Date: May 2011
  • Posts: 396
    • Show all replies
Re: HDD equipped A500 - which WB ?
« Reply #2 on: March 08, 2013, 11:25:00 AM »
Beats me...
I've been lost since the beginning of page two :D

EDIT:
Tell us the types of connectors (male or female). Adapters can have both.
« Last Edit: March 08, 2013, 11:27:39 AM by Lord Aga »
Glory to the loud-mouthed Scotsman !
 

Offline Lord Aga

  • Sr. Member
  • ****
  • Join Date: May 2011
  • Posts: 396
    • Show all replies
Re: HDD equipped A500 - which WB ?
« Reply #3 on: March 08, 2013, 05:15:39 PM »
Quote from: nickoteen;728585
44 pin side (2.5") has female connector, 40 pin side (3.5") has male connector.

Perhaps you (I :) ?) should buy this thing:
http://www.kupindo.com/Kontroleri/11472345_Adapter-CF-na-IDE-3-5-

And skip the suscpicious adapter.
Glory to the loud-mouthed Scotsman !
 

Offline Lord Aga

  • Sr. Member
  • ****
  • Join Date: May 2011
  • Posts: 396
    • Show all replies
Re: HDD equipped A500 - which WB ?
« Reply #4 on: March 08, 2013, 05:53:20 PM »
This is a great adapter :)
I even installed Windoze XP on a CF card for fun :D
For power, I think Amiga can use this:
http://amigakit.leamancomputing.com/catalog/product_info.php?products_id=1030
Glory to the loud-mouthed Scotsman !
 

Offline Lord Aga

  • Sr. Member
  • ****
  • Join Date: May 2011
  • Posts: 396
    • Show all replies
Re: HDD equipped A500 - which WB ?
« Reply #5 on: March 14, 2013, 01:51:09 PM »
Well, "my" adapter goes straight into the 40 pin IDE port. No cables necessary.
But I don't know if this is possible inside the A500. Is there room ?
If not, the go with that other adapter + cable for additional flexibility :)

Same thing with 2.5 adapters for A1200/A600. There are some that go straight on mobo's 44 pin. And some which require a cable, but are more flexible to move around.
Glory to the loud-mouthed Scotsman !