Welcome, Guest. Please login or register.

Author Topic: mediator pci 4000d broken  (Read 3238 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline escTopic starter

mediator pci 4000d broken
« on: July 13, 2011, 10:25:40 PM »
Hey guys,
I recently got a power tower mkii and the mediator card is screwed up.  The "P9" part - where you plug the power into it - is completely just broken off.  Any ideas here?  Should I ask for my money back?
Thanks.
 

Offline escTopic starter

Re: mediator pci 4000d broken
« Reply #1 on: July 13, 2011, 11:48:18 PM »
I'm certain I'd screw it up if I tried to do it myself.  It was ebay/paypal so a refund, legally, shouldn't be too tough...but I'd rather just get the stupid thing to work.
 

Offline escTopic starter

Re: mediator pci 4000d broken
« Reply #2 on: July 14, 2011, 04:10:56 AM »
Quote from: J-Golden;649427
Power sockets ARE one of the easier things to replace so in that sense, you are lucky.  But, If you try to fix it and there are other problems, then the seller will be able to say that you screwed it up and make the whole process much harder for you to get your money back.  I'd go for refund and start the process NOW!

I'd be worried that if one thing was visibly broken their might be more unseen damage.  It is obvious that the seller did not represent the item properly in his auction (This is sketchy even for "AS IS") so I would bet he isn't an honest person.

Do you still have the link to the auction?  Please post it here so we can:

A) See how he tried to represent the board so we can offer pointers on how to present your argument.

B) So others can know who the seller is and be more cautious around his sales.

Which ever path you choose to do, GOOD LUCK!

As it turns out, the seller is VERY helpful.  I'd rather not post a link to be potentially slanderous...we're not sure if it was a problem with UPS (just had an issue with an a3000 with UPS...still unresolved :madashell:) but he's already contacted UPS and Elbox about getting this fixed.

As far as getting a refund...I got such a good deal that I'm hesitant.  Plus the guy packaged everything to the best of anyone's ability...I suppose sometimes things just happen.  *shrug*

Here's a pic where the connecter is supposed to be.  You can see that it is simply snapped off where it was soldered to the board.
 

Offline escTopic starter

Re: mediator pci 4000d broken
« Reply #3 on: July 14, 2011, 04:34:07 AM »
I'm sure I could figure it out or find someone that could do it, but to be honest, I am not exactly sure what part it is that I'm looking for.  Any ideas?  :)
 

Offline escTopic starter

Re: mediator pci 4000d broken
« Reply #4 on: July 14, 2011, 04:48:26 AM »
Thanks man.  I suppose I'll go junkin' tomorrow and see if I can find one.
 

Offline escTopic starter

Re: mediator pci 4000d broken
« Reply #5 on: July 14, 2011, 03:18:58 PM »
From Elbox:

This connector is not necessary.
It is only the additional power supply. In most configurations the regular supply is sufficient.

So, I'm hesitant to fire it up with all the gadgets that I have plugged into it...what do you guys think?
 

Offline escTopic starter

Re: mediator pci 4000d broken
« Reply #6 on: July 15, 2011, 04:04:54 AM »
Hmm, that's interesting.  I hooked everything up today but have a few more things to do before I power it on for the first time.

For the record, I have the following in the mediator:

Voodoo3
Fast ethernet
USB 2.0
TV Card
SoundBlaster card

In the zorro side:
Fast ATA MKV

In the zorro/graphics side:
CV3D/Scandoubler

We'll see tomorrow :)  Thanks a ton for all the help dudes.