FS: Amiga 4000D

[r.cade]

Hi guys,

I have a couple of Amiga 4000's for sale.  This is the first one. They  are identical specs-wise, except this one has the original top case and  the other one has a new aluminum replacement cover.

It is complete, the battery was removed long ago, so no corrosion as you  can see in the pictures.  It still works flawlessly, except it seems  you have to wiggle the audio connectors to get both channels.

A4000/040-25, 16M Fast, 2M Chip
6.4G Hard Disk
52x CDRW drive, works with IDEFix97
NO keyboard/mouse, as I don't have extras. Sorry.
$325 OBO + Actual Shipping

I have several Video Toaster and Flyer cards if you want them, too.  $50/each

Original Large pictures at http://rittwage.com/pics/a4000a

[r.cade]

Hi guys,

I am in Augusta, GA 30907.

-Pete

[r.cade]

I have a Toaster and Flyer card already but lack the necessary cabling to connect them. I'd consider buying another card or two if that would get me the cable(s). You got? I'm "next door" over in Alabama. Heh.

Do you mean the replacement BNC connector strip for the VT4000 that has the ribbon that goes to the flyer?  I only have one of those, so that VT and Flyer would have to be sold as a set.

I have contacted Newtek to see if they have any of those, and they did not.  You would have to pin-out and make one...

[r.cade]

I will go through and test what I have left to make sure they work.  I found one Toaster "2000" board as well that I believe only works in the 2000 or 3000.

[r.cade]

Honestly I am wary of selling them without testing to know if they work. Even though I am selling them cheap, nobody wants possibly broken stuff.  I need to find some rig of SCSI drives that will be recognized.

[r.cade]

Yes, the ribbon cable.  

The way Newtek handled this is when you bought a flyer, it included a replacement part for the Toaster to swap out that replaced the BNC connector bus on the card.  This had an integrated ribbon cable that linked them.  It was never a separate cable-only thing.

I only have one Toaster with this connector/ribbon on it.  The other two Toaster 4000's don't have it.

I believe one Toaster is not working- it gets "Toaster not Responding" error when you try. I seem to recall this can be from it being out of adjustment/sync also, though, so I just need to test all this stuff and relist in a different thread.  I will honor the order of requests, though.

[r.cade]

Noted.

[r.cade]

I found some SCA SCSI drives, and some adapters, so I may try it here in the next week or two.  

If you want them as-is, I can do that, but obviously the Flyers are untested and non-returnable if you want them.

[r.cade]

Let me know if you stated interest in an untested Flyer and I didn't PM you.  I have 3 of them.  I will send pics tonight...

I only have one Toaster card that has the ribbon for the Flyer still on it, so I would like to sell that as a set since the cable is hard to find.  On the other two, it is just the raw card, no cables, so you will have to have your own or make one.

[r.cade]

Hi guys,

The second complete machine is here.
http://www.amibay.com/showthread.php?t=34177

-Pete

[r.cade]

That one is sold, too.  Next I will photo the Flyer cards everyone asked about.

[r.cade]

I have two cards and one octopus...  Untested.    One looks like it's been repaired before, hence the second photo of the back.

Pics here:
http://rittwage.com/pics/flyers

I have already sent PM to Ami_Gfx and Sandman, they have priority since they contacted me first.